587628
36
Zoom out
Zoom in
Previous page
1/118
Next page
36
English
IFCW3LJ 1210 - 5375700_01
LIQUID CRYSTAL DISPLAY
With the remote control on (ON), the display shows the settings of the unit, with the remote control off (OFF) the display is off
and only displays the timer for the programmed activation (if active).
1 - OPERATING MODE
Shows the operating mode:
AUTO automatic
FAN ventilation
COOL cooling
DRY dehumidification
HEAT heating
2 - FAN SPEED
Display of the three fan speeds and the automatic speed control:
AUTO automatic speed control
HIGH high speed
MED medium speed
LOW low speed
3 - HORIZONTAL BLADE POSITION
Displays the four fixed positions of the horizontal blades and oper-
ation with the blades moving.
4 - KEY LOCK
Shows the key lock function is activate.
5 - SLEEP PROGRAMME
Shows the night comfort function SLEEP is active.
6 - TEMPERATURE (°C) OR (°F)
Displays the set point temperature value in °C or °F.
7 - TIMER
Indicates that the timer programmed on or off function has been activated.
8 - TRANSMISSION INDICATOR
Appears every time a button is pushed and it indicates the transmission of the signal.
PREPARATION OF THE REMOTE CONTROL
Open the battery cover by pressing slightly in the direction of the arrow.
Insert two 1.5 Volt high-performance alkaline batteries LR 03 (AAA), being careful not invert the polarity.
Close the battery cover.
IMPORTANT
The two control types, wired control panel and remote control, cannot be used at the same time on the same fan coil unit.
The batteries have an average life of 10 months when used normally.
The two batteries must be identical and must be changed at the same time.
– Remove the batteries from the remote control unit if you envisage the units not being used for long periods.
When the remote control only works near the fan coil unit, it is time to replace the batteries.
Do not fix the remote control bracket near a source of heat or in direct sunlight. Avoid exposing the remote control to exces-
sive humidity or knocks (it might break, become deformed, or lose its colour ).
Do not place the remote control near electronic equipment because it could interfere with the unit's proper operation.
USE OF THE REMOTE CONTROL
Point the remote control transmitter towards the fan coil receiver while the settings
are being programmed.
To be able to carry out any operation or change of the settings from the remote con-
trol, the unit must be powered.
When a signal is received correctly by the FCW it will emit a beep. If you do not
hear the sound, press the remote control button again.
Obstacles must not be placed between the transmitter and the receiver (e.g. furniture
or curtains) to ensure proper operation.
The remote control is able to transmit effectively up to 7 metres from the fan coil unit
receiver.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aermec FCW 41VLN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aermec FCW 41VLN in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 17,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info