587619

Aermec FCW 41VL Manual

41
Zoom out
Zoom in
Previous page
1/118
Next page
41
English
IFCW3LJ 1210 - 5375700_01
1) TURN ON WITH OR KEYS
– Set the required conditions (MODE, FAN, TEMP) on the remote control that you
want active when starting the unit.
– Turn off with keys
or
2) ACTIVATE THE TIMER ON WITH OR KEYS
3) SET THE TIMER ON WITH
OR KEYS
– The key with the symbol
allows increases of 1 hour
– The key with the symbol
allows decreases of 1 hour
The display only shows the hours the unit remains off before the unit is turned on,
TLW2 from 1 to 18 hours,
PLW2 from 1 to 24 hours,
The number is updated every hour until the unit turns on.
At the time of switching on the unit:
- a beep indicates that the unit has started
- the display will show the conditions previously chosen in point 1)
At the time the unit is programmed to come on, the fan may not come on:
- because the space temperature is already within the programmed parameters
- because the temperature of the water is not appropriate for the operation mode
required
- because during the programmed standby hours the unit's power went down.
4) PRESS THE SET OR TIMER KEYS TO CONFIRM THE TIMER
5) PRESS THE SEND KEY (TLW2)
To transmit the new parameters shown on the LCD to the remote control.
TO CANCEL THE TIMER SETTING
- TLW2: Press the
key to cancel the timer setting
- PFW2: Press the TIMER key for 3 seconds to cancel the timer setting.
- Press the
or key to manually turn ON the unit while the timer is pro-
grammed.
PFW2
TLW2
PFW2
TLW2
1) TURN ON WITH OR KEYS
– Set the conditions (MODE, FAN, TEMP) on the remote control
2) TO ACTIVATE THE TIMER OFF WITH
OR KEYS
3) SET THE TIMER OFF WITH
OR KEYS
– The key with the symbol
allows increases of 1 hour
– The key with the symbol
allows decreases of 1 hour
The display shows the operating mode and the programmed running hours before
the unit is turned off,
TLW2 from 1 to 18 hours,
PLW2 from 1 to 24 hours,
The number is updated every hour until the unit turns off.
Before the programmed turn off a beep will be emitted from the unit.
At the time the unit is programmed to turn off the unit may not switch off if the
power has been interrupted during the programmed running time.
4) PRESS THE SET OR TIMER KEYS TO CONFIRM THE TIMER
5) PRESS THE SEND KEY (TLW2)
To transmit the new parameters shown on the LCD to the remote control.
TO CANCEL THE TIMER SETTING
- TLW2: Press the
key to cancel the timer setting
- PFW2: Press the TIMER key for 3 seconds to cancel the timer setting.
- Press the
or key to manually turn OFF the unit and the timer pro-
gramme is cancelled.
TURN ON PROGRAMMED BY THE TIMER
TURN OFF PROGRAMMED BY THE TIMER
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aermec FCW 41VL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aermec FCW 41VL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 17,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info