618089
22
Zoom out
Zoom in
Previous page
1/100
Next page
22
ACTIVATION
To Activate the XR2, press and release the Advance (Front) button.
The XR2 will also automatically activate by water contact, unless
Wet Activation is set OFF (a user setting). This is accomplished
by bridging the gap between contacts located on the stems of the
control buttons and back of the module. The graphic H2O will be
displayed as an indication. If the Water Activation feature (a user
setting) is set OFF, the XR2 will only activate by push button and
only if shallower than 4 feet (1.2 meters) depth.
 Upon manual activation, the Backlight will come ON and the
unit will enter Diagnostic Mode (Fig. 15), displaying all seg-
ments of the LCD, then dashes, then a countdown from 9 to 0.
 Diagnostic Mode checks the display and battery voltage to en-
sure that everything is within tolerance and functioning prop-
erly.
 When the Advance (Front) button is held depressed when the
Diagnostic countdown reaches 00, an External Access request is
initiated. A Serial Number screen appears displaying the units
Serial Number and firmware code Revision Number as long as
the button is held depressed (Fig. 16). Upon releasing the but-
ton, the unit shuts Off.
Fig. 15 - Diagnostic Mode
Fig. 16 - Serial Number
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris XR-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris XR-2 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info