618075
95
Zoom out
Zoom in
Previous page
1/124
Next page
95
Surfacing from a Simulated Dive
The Simulator will enter Demo Surface Mode (Fig. 95) upon as-
cending to 3 feet (1 meter) or shallower.
Press and hold the Select (Side) button for 4 seconds to access
Time Acceleration. The small Time Clock icon will begin flash-
ing.
Tap (press/release) the Select (Side) button to increase Surface In-
terval Time 1 minute per real time second.
Tap (press/release) the Select (Side) button during the Time Ac-
celeration to restore the time rate to normal.
FO2 can be set 10 minutes after surfacing.
Tap (press/release) the Advance (Front) button to access FO2 Set
Mode. The FO2 graphic and value previously set will appear with
the value flashing.
Press/release the Select (Side) button to increase the FO2 value in
increments of 1%, or press and hold it to scroll.
Tap (press/release) the Advance (Front) button to accept the FO2
setting and return to Demo Surface Mode.
To make another dive, press and hold the Select (Side) button for
2 seconds to access Dive Mode.
To revert operation to real Surface Mode (Fig. 96), press and hold
Both buttons simultaneously for 2 seconds.
Fig. 95 - Demo Surface Mode
Fig. 96 - Real Surface Mode
SIGNAL
DEMO
PSI
NITROX
SIGNAL
PSI
NITROX
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris Atmos Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris Atmos Elite in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info