618066

Aeris A300 XT Manual

28
Zoom out
Zoom in
Previous page
1/56
Next page
28
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
DECO STOP MAIN, information includes (Fig. 71) -
> Z+ (or DSAT) icon, algorithm selected.
> CF icon, if set On.
> Current Depth with FT (or M) icon.
> Stop Depth with FT (or M) icon.
> Stop icon (arrows, bar).
> Stop Time (hr:min) with wave/clock/profile/bar (Deco) icon.
> Gas (tank) 1 icon; one in use (1, 2, or 3) if TECH.
> NX icon, if FO2 is set for Nitrox, blank if Air.
> Full TLBG (all segments).
• A (< 2 sec) to access ALT 1.
• M (2 sec) to access Gas Switching (TECH only).
• S (< 2 sec) to silence/acknowledge alarms.
• S (press) to activate Smartglo
®
Backlight.
DECO STOP ALT 1, information includes (Fig. 72) -
> Max Depth with FT (or M) and MAX icons.
> Total Ascent Time (hr:min) with TAT and clock icons.
• A (< 2 sec) to access ALT 2.
• M (< 2 sec) to step back to Main.
• 10 sec, revert to Main if A or M is not pressed.
• S (press) to activate Smartglo
®
Backlight.
DECO STOP ALT 2, information includes (Fig. 73) -
> Max Depth with FT (or M) and MAX icons.
> EDT (hr:min) with wave/clock icon.
• A (< 2 sec) to access ALT 3.
• M (< 2 sec) to step back to ALT 1.
• 10 sec, revert to Main if A or M is not pressed.
• S (press) to activate Smartglo
®
Backlight.
DECO STOP ALT 3, information includes (Fig. 74) -
> Time of Day (hr:min) with AM (or PM) icon if 12 Hour.
> Temperature with °F (or °C) icon.
• A (< 2 sec) to access ALT 4 if Nitrox, or revert to Main if Air.
• M (< 2 sec) to step back to ALT 2.
• 10 sec, revert to Main if A or M is not pressed.
• S (press) to activate Smartglo
®
Backlight.
DECO STOP ALT 4, information includes (Fig. 75) -
> Z+ (or DSAT) icon, algorithm selected.
> O2% accumulated with icon.
> FO2 with icon, value set for Gas in use.
> PO2 value (x.xx ATA) with icon.
> Gas (tank) 1 icon; one in use (1, 2, or 3 if TECH).
> NX icon.
• A (< 2 sec) to revert to Main.
• M (< 2 sec) to step back to ALT 3.
• 10 sec, revert to Main if A or M is not pressed.
• S (press) to activate Smartglo
®
Backlight.
NORM/TECH CONDITIONAL VIOLATION (CV)
Upon ascent above the required Deco Stop Depth, operation will enter CV during which no off gassing credit will be given,
meaning Deco Stop Time and TAT will not decrease.
The Audible will sound during which the alarm LED will flash. A Down Arrow will also flash (Fig. 76) until descent is made to
below the required Stop Depth, then it is removed.
• S (< 2 sec) to silence Audible.
> Other button operations and displays are similar to Deco.
If descent below the required Deco Stop Depth is made within 5 minutes, operation will resume in Deco with off gassing credit
given (Stop Time and TAT will decrease).
Fig. 71 - DECO STOP MAIN
Fig. 72 - DECO STOP ALT 1
Fig. 74 - DECO STOP ALT 3
Fig. 73 - DECO STOP ALT 2
Fig. 75 - DECO STOP ALT 4
Fig. 76 - CV MAIN
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 XT in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info