618066

Aeris A300 XT Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
20
A300/A300 XT OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7255-r01 (5/14/12)
HISTORY MODE
History is a summary of data recorded during all NORM, TECH, and GAUG dives conducted.
If no dives have been recorded, the graphics NONE YET will be displayed upon accessing screen 1, other screens will not be
available.
History 1, information includes (Fig. 52):
> Total dive hours recorded (up to 9999) with clock icon.
> Total dives recorded (up to 9999) with # icon
.
> HIST icon.
• S (< 2 sec) to access History 2.
• A (< 2 sec) to step forward to ID-SN.
• M (< 2 sec) to step back to SET Lead-in.
• 2 minutes, or M (2 sec), revert to Main.
History 2, information includes (Fig. 53):
> Max Depth recorded with FT (or M) and MAX icons.
> Longest dive time (hr:min) recorded during a single dive (up to 9:59 min) with wave/clock (EDT) icon.
> HIST icon.
• A (< 2 sec) to access History 3.
• S (2 sec) to revert to History 1.
• 2 minutes, or M (2 sec), revert to Main.
History 3, information includes (Fig. 54):
> Lowest Temperature recorded during a dive with °F (or °C) icon.
> Graphic SEA (or L2 to L7), highest Altitude at which a dive was conducted.
> HIST icon.
• A (< 2 sec) to revert to History 1.
• S (2 sec) to revert to History 1.
• M (< 2 sec) to step back to History 2.
• 2 minutes, or M (2 sec), revert to Main.
ID - SN (Identification), information includes (Fig. 55):
This information should be recorded and kept, it will be required in the event that your unit requires factory service.
> Graphic R1A (or higher)*, indicating the Firmware revision level currently installed in the unit.
> Factory programmed serial number (up to 5 digits) with # icon.
*This number will change if the Firmware is updated by factory service or by future download of a newer revison from the
AERIS web site.
• A (< 2 sec) to revert to Surface Main.
• M (< 2 sec) to step back to History 1.
• S (< 2 sec) to access Clear, only after dives when residual nitrogen remains.
• 2 minutes, or M (2 sec), revert to Main.
NORM/TECH CLEAR, information includes (Fig. 56):
The unit is configured with a feature that allows nitrogen and oxygen calculations to be cleared.
This is intended for facili-
ties using the unit for rental or training activities, not for general use by individual divers.
WARNING: Reset after a dive and subsequent use for a repetitive dive conducted by the same diver
could result in serious injury or death.
Reset procedure:
• S (< 2 sec), while the ID-SN screen is displayed, to access the Clear screen displaying the graphic CLR and the reset code
numbers xx yy, all solid.
• S (< 2 sec) again will flash the first 2 digits (xx).
• A (hold) to scroll upward through the first digits (xx) from 01 to 49 at 8/sec.
• A (< 2 sec) to step upward through the digits (xx).
• M (< 2 sec) to step back through the digits (xx).
• S (< 2 sec) to save the first 2 digits (xx) and flash the second 2 digits (yy).
• A (hold) to scroll upward through the second digits (yy) from 01 to 49 at 8/sec.
• A (< 2 sec) to step upward through the digits (yy).
• M (< 2 sec) to step back through the digits (yy).
• S (< 2 sec) to save the reset code, clear the unit (if 20 02), and turn it Off. All nitrogen/oxygen calculations and data will
be deleted.
• S (2 sec) will revert to the ID-SN screen, if the reset code is not entered correctly, or you want to exit the routine without
clearing the unit.
Fig. 52 - HISTORY 1
Fig. 53 - HISTORY 2
Fig. 54 - HISTORY 3
Fig. 55 - IDENTIFICATION
Fig. 56 -CLEAR
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A300 XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A300 XT in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info