618063

Aeris A100 Manual

18
Zoom out
Zoom in
Previous page
1/32
Next page
18
A100 OPERATING MANUAL
© 2002 Design, 2012 Doc. No. 12-7271-r01 (4/25/12)
NO DECO MAIN, information includes (Fig. 40) -
> Z+ (or DSAT) icon, algorithm selected.
> CF icon, if set On.
> Current Depth with FT (or M) icon.
> DTR (hr:min) with wave/clock/profile (NDC) icon.
> NX icon, if FO2 is set for nitrox, blank if Air.
> TLBG, VARI, if they apply.
• B (< 2 sec) to access ALT 1.
NO DECO ALT 1, information includes (Fig. 41) -
> Max Depth with FT (or M) and MAX icons.
> EDT (hr:min) with wave/clock icon.
• B (< 2 sec) to access ALT 2 if Nitrox, or revert to Main if Air.
• Revert to Main in 10 sec, if B is not pressed.
NO DECO ALT 2 (only if Nitrox), information includes (Fig. 42) -
> Z+ (or DSAT) icon, algorithm selected.
> O2% accumulated with icon.
> FO2 with icon, value set.
> PO2 value (x.xx ATA) with icon.
> NX icon.
• 10 sec or B (< 2 sec) to revert to Main.
SAFETY STOP MAIN, information includes (Fig. 43) -
> Z+ (or DSAT) icon, algorithm selected.
> CF icon, if set On.
> Current Depth with FT (or M) icon.
> Stop Depth with FT (or M) icon; fixed at 15 FT (4.5 M).
> Stop icon (arrows, bar) with SS icon.
> Stop Time (min:sec) with clock icon; start at 3 minutes.
> NX icon, if FO2 is set for Nitrox, blank if Air.
> TLBG, VARI, if they apply.
• B (< 2 sec) to access ALTs**.
** The SS features up to 3 ALT displays which are similar to the No Deco Main, ALT1, and ALT2 displays, respectively.
DECOMPRESSION
Decompression mode activates when theoretical No Decompression time and depth limits are exceeded.
Upon entry into Deco, the full TLBG will flash (Fig. 44) for 10 seconds. The Stop Depth digits will flash while 10 FT (3 M) below
the required Stop Depth.
> Once within 10 FT (3 M) below the required Stop Depth (stop zone), the Stop Depth digits will stop flashing.
To fulfill your decompression obligation, you should make a safe controlled Ascent to a depth slightly deeper than, or equal to,
the required Stop Depth indicated and decompress for the Stop Time indicated.
The amount of decompression credit time that you receive is dependent on Depth, with slightly less credit given the deeper you
are below the Stop Depth indicated.
You should stay slightly deeper than the required Stop Depth indicated until the next shallower Stop Depth appears. Then, you
can slowly ascend to, but not shallower than that indicated Stop Depth.
DECO STOP MAIN, information includes (Fig. 45) -
> Z+ (or DSAT) icon, algorithm selected.
> CF icon, if set On.
> Current Depth with FT (or M) icon.
> Stop Depth with FT (or M) icon.
> Stop icon (arrows, bar).
> Stop Time (hr:min) with wave/clock/profile/bar (Deco) icon.
> NX icon, if FO2 is set for Nitrox, blank if Air.
> Full TLBG (all segments).
• B (< 2 sec) to access ALT 1.
Fig. 40 - NO DECO MAIN
Fig. 41 - NO DECO ALT 1
Fig. 42 - NO DECO ALT 2
Fig. 43 - SS MAIN
Fig. 44 - DECO ENTRY
Fig. 45 - DECO STOP MAIN
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeris A100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeris A100 in the language / languages: English as an attachment in your email.

The manual is 7,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info