707719
17
Zoom out
Zoom in
Previous page
1/158
Next page
15
GB
English
TECHNICAL DATA
Angle Grinder
WS 10-115 S WS 10-115 SK WS 10-125 S WS 10-125 SK
Production code
4561 04 01...
... 000001-999999
4601 57 01...
... 000001-999999
4561 16 01...
... 000001-999999
4561 22 01...
... 000001-999999
Rated input 1000 W 1000 W 1000 W 1000 W
Rated speed 11500 min
-1
11500 min
-1
11500 min
-1
11500 min
-1
D= Grinding disk diameter max.
d= Grinding disk hole diameter
115 mm
22,2 mm
115 mm
22,2 mm
125 mm
22,2 mm
125 mm
22,2 mm
b= Cutting disk thickness min. / max.
1/3 mm 1/3 mm 1/3 mm 1/3 mm
b= Grinding disk thickness max. 6 mm 6 mm 6 mm 6 mm
D= Grinding surface diameter max. 115 mm 115 mm 125 mm 125 mm
D= Wiring brush diameter max. 75 mm 75 mm 75 mm 75 mm
Thread of work spindle M 14 M 14 M 14 M 14
Weight according EPTA-Procedure 01/2003 2,3 kg 2,3 kg 2,3 kg 2,3 kg
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 87,1 dB (A) 87,1 dB (A) 87,1 dB (A) 87,1 dB (A)
Sound power level (Uncertainty K=3dB(A)) 98,1 dB (A) 98,1 dB (A) 98,1 dB (A) 98,1 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding:
Vibration emission value a
h,SG
Uncertainty K=
6,2 m/s
2
1,5 m/s
2
6,2 m/s
2
1,5 m/s
2
6,2 m/s
2
1,5 m/s
2
6,2 m/s
2
1,5 m/s
2
Disk sanding:
Vibration emission value a
h,DS
Uncertainty K=
6,0 m/s
2
1,5 m/s
2
6,0 m/s
2
1,5 m/s
2
6,0 m/s
2
1,5 m/s
2
6,0 m/s
2
1,5 m/s
2
TECHNICAL DATA
Angle Grinder
WS 12-125 S WS 12-125 SK WS 13-125 SXE WS 13-125 SXEK
Production code
4561 40 01...
... 000001-999999
4561 46 01...
... 000001-999999
4561 58 01...
... 000001-999999
4561 64 01...
... 000001-999999
Rated input 1200 W 1200 W 1300 W 1300 W
Rated speed 11500 min
-1
11500 min
-1
2800 - 11500
min
-1
2800 - 11500
min
-1
D= Grinding disk diameter max.
d= Grinding disk hole diameter
125 mm
22,2 mm
125 mm
22,2 mm
125 mm
22,2 mm
125 mm
22,2 mm
b= Cutting disk thickness min. / max.
1/3 mm 1/3 mm 1/3 mm 1/3 mm
b= Grinding disk thickness max. 6 mm 6 mm 6 mm 6 mm
D= Grinding surface diameter max. 125 mm 125 mm 125 mm 125 mm
D= Wiring brush diameter max. 75 mm 75 mm 75 mm 75 mm
Thread of work spindle M 14 M 14 M 14 M 14
Weight according EPTA-Procedure 01/2003 2,4 kg 2,4 kg 2,4 kg 2,4 kg
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WS 13-125 SXEK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WS 13-125 SXEK in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info