573996

AEG WM 12 97009 Manual

13
Zoom out
Zoom in
Previous page
1/45
Next page
GB
2524
OPERATION
Before charging batteries
▪
If the battery must be removed from the vehicle before charging, always discon-
nect the earthed connector from the battery first. Also ensure all other loads in
the vehicle are off.
▪
Ensure adequate ventilation to allow any toxic vapours or gasses to disperse.
▪
Ensure the battery poles are clean. If the battery has a removable vent cap, fill
each battery cell with distilled water to the manufacturer recommended level. Do
not overfill the cells.
▪
If the battery does not have caps, refer to the manufacturer instructions on char-
ging and the charging speed.
Connecting the battery
Risk of electrical shock!
Always verify the charging device is disconnected from the 230 V AC
outlet when connecting to a battery..
▪
Always ensure the area around the battery is well ventilated during the charging
process.
1. Before connecting verify the switch is set to the desired voltage:
▪
6 V Low: slow charging
▪
12 V Low: slow charging
▪
12 V High: quick charging
2. Connect the positive charging clamp (red) to the positive battery terminal
(marked P or +).
3. Connect the negative charging clamp (black) to the body of the vehicle, or in
exceptions to the negative battery terminal (marked N or -).
4. Verify both terminal clamps make good contact with the respective terminals.
5. Plug the power plug into a suitable AC mains outlet
The green „POWER“ LED (4) is lit.
In the event it is connected with reverse polarity the “Reverse Connection” LED will
light up red and charging will not start.
Product overview
1. Charge mode selector switch
6 V Low
12 V Low
12 V High
2. Amber/green charge level indicator
LED
amber (6 V / 12 V Charging LED)
green (12 V Fast Charging Complete
LED)
3. Red LED “Reverse Connection”
4. Green LED „POWER“
5. Power cable with plug
6. Charging cable (-) with charging
clamp (black)
7. Charging cable (+) with charging
clamp (red)
8. Plug-in fuse
Start charging
If the charging device is correctly connected it will automatically start charging. This
process is indicated by the amber “charging level indicator” (2) LED.
The charging process is fully automatic. If the “Charge level indicator” (2) LED
switches from amber to green the battery is fully charged and can be disconnected
from the charging device.
1
2
3
4
6
7
5
8
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WM 12 97009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WM 12 97009 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info