464393

AEG WKL 752 Manual

7
Zoom out
Zoom in
Previous page
1/24
Next page
7
English
2. Installation instructions
ATTENTION!
The installation, electrical connection and first operation of this appliance should be carried out by a
qualified installer.
The company does not accept liability for failure of any goods supplied which have not been installed
and operated in accordance with the manufacturer's instructions.
This convector heater must be installed by an authorised serviceman in conjunction with these instructions.
These installation instructions belong to the heater and must be handed on to the successor if the heater is
sold.
AEG convector heaters are direct electric heaters designed to be mounted on the wall and are particularly
suitable for heating smaller rooms such as utility rooms, kitchen, bath- and washrooms etc.
The convector heater is supplied with a lead.
(Exception: WKL502 C to WKL3002 C)
The convector heater must not be mounted immediately
below a wall socket.
During the just operation, the heater may give off a smell.
Ensure that the room is ventilated (for example, open a
window).
2.1 Attaching the wall mounting bracket
The wall mounting bracket is oriented centrally
(see figure and the following table).
Use the wall-mounting bracket as a template for positioning the heater correctly and providing the correct
distance from the floor.
Place the bracket on the floor. Mark the screw-holes through the drill holes (j).
Type WKL WKL WKL WKL WKL WKL WKL
502 752 1002 1502 2002 2502 3002
Connecting power W 500 750 1000 1500 2000 2500 3000
Breadth mm 370 370 445 590 740 890 1036
Heigth mm 450 450 450 450 450 450 450
Depth mm 78 78 78 78 78 78 78
with wall mounting 100 100 100 100 100 100 100
Measure A 121 121 195 343 491 639 790
Weight kg 4.1 4.1 4.7 6.1 7.4 8.1 10.0
Raise the bracket and position it in such a way that holes B
are aligned with the marks on the wall you have just made.
Now mark the upper holes through holes C and D in the wall
mounting ( II ).
Drill the four holes, insert plugs and screw the wall mounting
securely to the wall using four screws.
2.2 Wall mounting the convector
On the backside of the convector there are 4 slots, these
should be hooked onto the wall bracket and pushed down.
The spring clips should be turned clockwise to secure.
To remove the convector reverse the above operation.
For the Professional
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WKL 752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WKL 752 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info