464410

AEG WKL 3003 Manual

11
Zoom out
Zoom in
Previous page
1/54
Next page
11
for the user and the professional installer
2
1
C26_07_31_0037
Important features
in brief
1 On/off switch
2 Temperature selector button
3 Locking pin
3
1. Operation instructions
Use of electrical equipment in principle requires care to ex-
clude any potential risks from fire, electrical shock or injury.
Therefore the unit should only be used as described in these
instructions, where any use outside the manufacturer‘s re-
commendations can lead to damage or injury.
The correct match between the heat requirement of the room
and the heating power of the unit must be observed.
Before use of the unit, read the entire instructions and follow
the information given on proper handling of the unit.
These instructions should be kept carefully and handed to any
subsequent user of the unit. Please show them to the engine-
er performing any repair work.
1.1 Description
The WKL is an electric direct heater exclusively for wall installation. It is suitable e.g. for heating a ba-
throom or as transitional or additional heating for small rooms such as hobby rooms or guest rooms.
Series WKL-S
After wall mounting and electrical connection via a plug and socket, the unit is ready for use.
Series WKL-U
After wall mounting and electrical connection via a fixed connection through a junction box (note nati-
onal regulations), the unit is ready for use.
Function
The air in the convector is heated by a heating element and emerges by natural convection at the top
through the air outlet grille (4). The openings in the underside of the unit provide it with cool room air
Safety device
The convector has a protective thermostat (STR) which switches the appliance off on overheating. After
eliminating the cause (e.g. covered air outlet or inlet opening), after a cooling down period of a few mi-
nutes the unit resumes operation.
1.2 Operation
The convector is switched on and off via the switch (1) on the right-hand side. The desired room tempe-
rature is set via the temperature selector (2) anywhere between around +6°C and +30 °C. As soon as the
set room temperature has been reached, it is maintained constantly by intermittent heating (the heating
power of the unit must correspond at least to the heat requirements of the room).
If several heaters are fitted in a room, the temperature setting on each unit may vary.
To avoid excessive energy consumption with the windows open, the unit should be switched off during
ventilation at the switch (1).
Frost protection
If the unit is used as a frost guard, set the temperature selector (2) to the far right stop (*). In this positi-
on the thermostat switches the heating on automatically if the room temperature falls to around +6°C.
English
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WKL 3003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WKL 3003 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info