517494
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
11.4.4 Change the dial mode
You should normally leave the dial mode at its default setting of “TONE” (also called DTMF) unless the
phone is connected to an old exchange that only recognises “PULSE” dialling.
Note:
If PULSE dialling is set, you can press the * key to switch to “TONE” dialling for the rest of that call.
tPress
and / to select “BS SET”.
tPress
OK
and / to select “DIALMODE“.
tPress
OK
and / to select “TONE” or “PULSE”.
tPress
OK
to confirm.
11.4.5 Change the recall (flash) time
You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options
are SHORT (the default value of 100ms), MID (300ms) or LONG (600ms).
tPress
and / to select “BS SET”.
tPress
OK
and / to select “FLASH”.
tPress
OK
and / to select your desired recall(flash) time (“SHORT” / “MID” / “LONG”).
tPress
OK
to confirm.
11.4.6 Change the system PIN code
A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect
your phone against unauthorised use. The default system PIN code is 0000.
tPress
and / to select “BS SET”.
tPress
OK
and / to select “CHG PIN”.
tPress
OK
and the display shows “OLD PIN?”.
tPress
OK
and the enter the old system PIN.
tPress
OK
, the display shows “NEW PIN?”, press
OK
and enter your new 4-digit system PIN.
tPress
OK
, the display shows “CONFIRM?”, press
OK
and enter your new 4-digit system PIN again.
Note:
If the new PIN entered in step 6 is not the same as the new system PIN entered in step5, you must enter
your new PIN at step 5 again.
tPress
OK
to confirm.
11.5 Reset your cordless handset
You can reset your phone to the default settings. After reset, all your personal settings, call list entries and
redial list entries will be deleted, but your phonebook remains unchanged.
tPress
and / to select “DEFAULT.
tPress
OK
to show “PIN?”
tEnter the 4-digit system PIN (default value 0000).
tPress
OK
to show “CONFIRM?”
tPress
OK
to confirm, and the phone will be reset to its default settings.
12 REGISTRATION
Important:
When you purchase your phone system, all handsets are already registered to your base, so you do not
need to register them. Handset registration is only necessary when you buy extra handsets or if a handset
has become faulty.
You can register additional handsets to have up to five handsets per base unit, with each handset’s number
(1 to 5) shown on its display.
Note:
Each handset can only be registered to one base.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG VOXTEL S110 COMBO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG VOXTEL S110 COMBO in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG VOXTEL S110 COMBO

AEG VOXTEL S110 COMBO Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info