517494
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
7.14 Making a call from direct memory keys
tIn idle mode, press M1, M2 or M3 to dial the number stored in the direct memory keys via speakerphone.
Lift up the corded handset to switch the call to the handset mode.
Note:
If the selected direct memory key is empty, an error tone is emitted via speakerphone and the corded base
will return to idle mode.
7.15 Answering a call
tPick up the corded handset or press
to answer the incoming call.
7.16 Ending a call
tDuring a call, put the corded handset on the base.
OR
tIf you are using the speakerphone, press
to end the call.
7.17 Redial the last number
tIn idle mode, press
on the corded base. If there is a redial number, the number will dial out in
speakerphone mode.
Lift up the corded handset to switch the call to the handset mode.
7.18 Direct memory keys
There are 3 direct memory keys (M1 to M3) on the corded base for you to store frequent numbers, of up
to 24 digits each.
If more than 24 digits are entered, only the first 24 digits are stored.
7.18.1 Saving a number in a direct memory key
tIn idle mode, press
.
tEnter the phone number.
tPress M1, M2 or M3 to store the number in that memory.
If there is already a number in your selected direct memory key, the new number will replace the previous
number.
Note:
The direct memory key cannot be cleared completely.
To remove a number, you can only overwrite it with a new number.
8 PAGING AND INTERCOM USE (FOR MULTI CORDLESS HANDSET SYSTEMS)
You can locate cordless handsets from the corded base or from other cordless handsets, and you can
make intercom calls between cordless handsets, or transfer calls between cordless handsets, or set up a
conference call between two cordless handsets and an external caller, provided you have more than one
cordless handset registered to your base.
Note:
You cannot make or receive intercom calls, transfers or conference calls with the corded base.
8.1 Find the handset
You can locate the handset by pressing the
button on the front of the base station. All the handsets
registered to the base will produce the paging tone and show “PAGING“ on the display for 60 seconds.
You can stop the paging by pressing
/ / on any handset or on the base again.
Note:
If there is an incoming call during paging, the phone will ring with the incoming call instead of paging.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG VOXTEL S110 COMBO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG VOXTEL S110 COMBO in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG VOXTEL S110 COMBO

AEG VOXTEL S110 COMBO Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info