518229
21
Zoom out
Zoom in
Previous page
1/36
Next page
21
UK
10.4 Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting the handset off the base
or charger, without having to press any key.
tPress
and / to select “HS SETTINGS“.
tPress
and / to select “AUTO ANSWER“.
tPress
and / to turn on or off the auto answer feature.
tPress
to confirm.
10.5 Base Settings
Using the cordless handset:
10.5.1 De-register a Handset
This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be
replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to de-register a handset from
the base station. A de-registered handset will have the antenna icon flashing and “REGISTER” on the
display.
Note:
You cannot de-register the handset that you are currently using.
tPress
and / to select “BS SETTINGS“.
tPress
to show “DELETE HS“.
tPress
and the display shows “PIN? ------”.
tEnter the 4-digit system PIN (default 0000).
tPress
and the first handset number is displayed.
tPress
/ to scroll through the list of registered handsets and select the number of the handset you
want to de-register.
tPress
to confirm, and the chosen handset will be de-registered.
10.5.2 Change the dial mode
You should normally leave the dialling mode at its default setting of “TONE“ (also called DTMF) unless the
phone is connected to an old exchange that only recognises “PULSE“ dialling.
Note:
If “PULSE“ dialling is set, you can press the * key to switch to “TONE“ dialling for the rest of that call.
tPress
and / to select “BS SETTINGS“.
tPress
and / to select “DIAL MODE“.
tPress
and / to select “TONE“ or “PULSE“ (The current setting is indicated by an asterisk to the
right).
tPress
to confirm.
10.5.3 Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options
are “SHORT“ (the default value of 100ms), “MEDIUM“ (300ms) or “LONG“ (600ms).
tPress
and / to select “BS SETTINGS“.
tPress
and / to select “FLASH TIME“.
tPress
and / to select your desired flash time (“SHORT“, “MEDIUM“, “LONG“, with the current
setting indicated by an asterisk to the right).
tPress
to confirm.
10.5.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect
your phone against unauthorised use. The default system PIN code is “0000“.
tPress
and / to select “BS SETTINGS“.
tPress
and / to select “CHANGE PIN“.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Voxtel D210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Voxtel D210 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Voxtel D210

AEG Voxtel D210 Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 160 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info