486523
13
Zoom out
Zoom in
Previous page
1/156
Next page
UK
13
tPress the stop button
briefly until you hear “Announcement 1“.
tPress and hold the OGM button
until you hear a beep.
>The display shows “OGM RECORDING” and the message counter starts to count.
tStart recording your OGM1. Speak directly into the base unit‘s microphone from a distance of about
15 cm).
tWhen you finish speaking, press the stop button
to stop recording.
>The display shows “PLAY OGM” and your recorded message will be played back.
14.3 To record OGM 2
After setting the OGM2, briefly press the stop button
again. You will hear “Announcement 2.”
tPress and hold the OGM button
until you hear a beep.
>The display shows “OGM RECORDING” and the message counter starts to count.
tStart recording your OGM2. Speak directly into the base unit‘s microphone from a distance of about
15 cm.
tWhen you finish speaking, press the stop button
to stop recording.
>The display shows “PLAY OGM” and your recorded message will be played back.
14.4 To switch between OGMs
tPress and release the stop button
to switch between OGM1 and OGM2.
>The machine does not record messages with OGM2 (announcement 2) selected; make sure
OGM1 is selected if you want callers to leave messages.
14.5 To turn the answering machine on / off
tPress and hold the on/off button
to turn on the answering system.
>You will hear, “Answering machine on. Announcement one.”
>The display shows “ANSWER A1” alternately with the calls information and the message light will
turn on.
tPress and hold the on/off button
again to turn off the answering system.
>You will hear, “Answering machine off.”
>The display shows “ANSWER OFF” alternately with the calls information and the message light
will turn off.
Note:
tOnce turned off, you can still call the machine and it will answer after 15 rings, so you can enter
remote access mode, if required.
14.6 To playback your message/s
If you have messages or memos, the display shows the total number of messages “XX MESSAGES”. If
you have new messages or memos, the display shows “XX NEW” and it will be shown alternately with
the total messages and the message light flashes.
14.7 Playback and pause
tPress the play/pause button
.
>The machine will play all new messages/memos.
>While a message is being played, the display shows the caller display information (if subscribed),
“PLAY MESSAGE” for received messages or “PLAY MEMO” for recorded memos.
>If there are no messages/memos present, you will hear “You have no messages”.
tTo pause a message playback, press the play/pause button
again.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Voxtel C115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Voxtel C115 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info