518253
7
Zoom out
Zoom in
Previous page
1/120
Next page
7
UK
tPress the store button to confirm.
>The “minute” icon will be blinking.
tPress the up or down button
to set the minute.
tPress the store button
to confirm the setting.
>The display shows ‚ “SET 2 LCD”, you can continue with programming, or press the delete button
to return to standby mode.
7.2 Set LCD contrast
tIn standby mode, press the store button
.
>The display shows “SET 1 DATE”.
tPress the up or down button
until the display shows “SET 2 LCD”.
tPress the store button
to confirm.
tPress the up or down button
to select your comfortable display viewing level (1~8).
>The default setting is 4.
tPress store button
to confirm the setting.
>The display shows “SET 3 FLASH” you can continue with programming, or press the delete
button
to return to standby mode.
7.3 Set flash time
This telephone gives you the possibility to use the special services of your network provider.
When pressing the recall button
, the phone generates a line interruption and the length depends
on your flash time setting.
The default value is 100ms,which is correct for most exchanges and should not need changing, but if
the phone is connected to a PBX that requires a different timing, there are options for 300ms, 600ms
or 1000ms.
tIn standby mode, press the store button
.
>The display shows “SET 1 DATE”.
tPress the up or down button
until the display shows “SET 3 FLASH”.
tPress the store button
to confirm.
tPress the up or down button
to select 100.
>(default),300, 600, or 1000.
tPress the store button
to confirm the setting.
>The display shows “SET 1 DATE”, you can continue with programming, or press the delete button
to return to standby mode.
8 TELEPHONE OPERATIONS
8.1 Making a call
tLift the handset or press the speakerphone button
and listen for a dial tone.
>The display shows “00-00”.
tDial the telephone number you wish to call.
>The display shows the number as you dial (maximum of 14 digits)
tTo end the call, return the handset to the base unit or press the speakerphone button
if
speakerphone is selected.
OR
you can pre-dial the number and check it on the display before dialling it.
tKey in the telephone number you wish to call.
>The display shows the number as you dial, and if you make a mistake you can press the delete
button
to delete the last digit.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

aeg-voxtel-c110

Reset search

  • Sveiki. Ar yra produktas pilkos arba baltos spalvos? Submitted on 10-12-2020 at 02:37

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Voxtel C110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Voxtel C110 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info