Manual AEG VL 5526 M (page 24 of 42) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

483368

Zoom out

Zoom in

1/42

English

ޥ NOTE:

There may still be dust or production residues on the

surface of the device. We recommend that you quickly

wipe o the housing with a damp cloth.

Assembly instructions

The device must be completely assembled before use!

While reading the text it is advisable to refer to the

„Overview of the Components“.

1. Place the stand tube (7) in the base (8).

2. Insert the washer (9) on the underside of the base.

3. Tighten the fastening screw (10) in a clockwise direc-

tion.

4. Position the rear protection grid (12) in place in ac-

cordance with the recesses.

ޥ NOTE:

Please ensure that the carrying handle is facing

upwards.

5. Turn the attachment ring (13) for the rear protection

grid (12) slightly in a clockwise direction.

6. Place the propeller in position and tighten it with the

retaining screw (2).

CAUTION:

The screw (2) has to be positioned on the  attened

section!

7. Attach the front protection grid (15) by inserting the

hook (1) with the groove into the rear protection

grid.

ޥ NOTE:

Ensure that the holes for the attachment screw in

the front and rear protective grille are aligned one

above the other.

8. Close the attachment hooks .

Secure the protection grid with the fastening screw

(16) and the nut (11).

Position

The ideal position is a non-slip,  at surface.

Putting into Service

Electrical Connection

1. Before inserting the plug into the socket. Make sure

that the mains voltage to be used matches that of

the device. You can  nd this information on the

nameplate.

2. Connect the device to a duly installed 230V/50Hz

protective contact socket.

Use

Basic Settings

Set the blower inclination angle before starting the

device. You can adjust the inclination angle by tipping

the blower casing with both hands.

CAUTION:

The inclination angle amounts to approx. 15°.

Rotary Switch

On the rotary switch you can select the following set-

tings:

o 1 slow

o 2 medium

o 3 fast

o 0 o

Shift to „0“ to switch o the device.

Fan Setting

For this you have two possibilities:

Fixed

• Turn the device o .

• Pull out the adjustment knob.

• Hold the fan by the protective cage and turn it in the

desired direction.

Oscillating

• Press in the adjustment knob.

• The device swivels automatically within a range of

approximately 60°.

• Pull the adjustment knob in order to switch the func-

tion o .

Cleaning

WARNING:

• Always remove the mains plug before cleaning the

device.

• If you need to remove the safety guard: Always

switch the device o and remove the mains plug.

• Under no circumstances should you immerse the

device in water for cleaning purposes. Otherwise

this might result in an electric shock or  re.

CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• Clean the outside of the device with a dry cloth

without any additives.

• If the device is very dirty wet a cloth with water and

then wipe the device dry once you have  nished.

Noise development

The workplace-related emission value is less than

70 dB(A).

05-VL 5526 M.indd 2405-VL 5526 M.indd 24 26.11.2008 14:55:33 Uhr26.11.2008 14:55:33 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG VL 5526 M in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG VL 5526 M Manual

Product: