464389
16
Zoom out
Zoom in
Previous page
1/36
Next page
16
Installation – for qualied contractors
INSTALLATION
7. Safety
7.1 Country-specic safety information
Observe these installation instructions during installation.
We guarantee trouble-free function and operational
reliability only if the original accessories and spare parts
intended for the appliance are used.
7.2 Instructions, standards and regulations
WARNING Electrocution
All electrical connection and installation work must
be carried out in accordance with VDE regulations
(DIN VDE 0100) [or local regulations], the rules of
your local power supply utility, and relevant national
and local regulations.
WARNING Electrocution
Never use a permanently installed connecting cable.
The appliance must be able to be separated from
the power supply by an isolator that disconnects all
poles with at least 3 mm contact separation.
WARNING Electrocution
Install the appliance in such a way that control
equipment cannot be touched by a person in the
bath or shower.
!
Material losses
Only t the appliance to a vertical wall that is tem-
perature-resistant to at least 85 °C.
Maintain minimum clearances to adjacent surfaces.
Never install the appliance directly below a wall
socket.
!
Material losses
Only remove appliance and accessory packaging at
the installation location; look out for the separate
pack.
When unpacking, ensure that no accessory parts
are left in the packaging.
!
Material losses
Observe the type plate. The specied voltage must
match the mains voltage.
Note
Observe the Building and Garage Regulations [or
local regulations].
Note
When installing the heating appliance in rooms with
a bath and/or shower, observe the safety zone ac-
cording to VDE 0100, section 701, in accordance with
the details on the appliance type plate.
8. Installation
8.1 Appliance installation
To secure the appliance, proceed as follows:
» Unpack the appliance carefully.
» Drill the xing holes in accordance with the
dimensioned drawing in the chapter “Specication”.
» Insert the rawl plugs. The rawl plugs supplied are
suitable for solid walls. For other wall structures,
suitable rawl plugs
must be provided on site.
» Insert the rst screw into the top hole drilled in the
wall, leaving approx. 3 mm of the screw protruding.
Then hook the appliance into the gap between the
wall and the screw head.
» Using the second screw, secure the additional
wall retainer, located at the lower rear part of the
appliance, to the wall.
The appliance can now no longer be removed from
the wall.
8.2 Power supply
» Select a power cable with an adequate
cross-section.
» Install a socket for permanent power supply at a dis-
tance of at least 10 cm from the side of the appliance.
» The power cable must not touch the appliance. Trim
it so it leads directly to the socket. Then strip the
wires and cut the cores to size.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG VH 227 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG VH 227 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG VH 227

AEG VH 227 User Manual - German - 16 pages

AEG VH 227 User Manual - German - 12 pages

AEG VH 227 User Manual - French, Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info