298735
10
Zoom out
Zoom in
Previous page
1/30
Next page
10
Telefon in Betrieb nehmen
Basis aufstellen und anschließen
Stellen Sie die Basis an einer zentralen Stelle der Wohnung/des Hauses auf, z.B. im
Flur. Meiden Sie als Aufstellort die Nähe von Rundfunk- und Fernsehgeräten/Monitoren
und PC`s. Die Basis ist für den Betrieb in geschützten Räumen mit einem Temperatur-
bereich von +5°c bis 35°C bei einer relativen Luftfeuchte von 25% bis 85% ausgelegt.
Beachten Sie weiterhin, dass die Empfangsstärke/-reichweite stark von den baulichen
Gegebenheiten anhängig ist. Im freien Gelände beträgt die Reichweite etwa 300m. In
Gebäuden können Reichweiten von max. 50m erreicht werden. Verwenden Sie nur
das beigelegte Telefonanschlußkabel. Der Telefonnetzanschluss entspricht dem
internationalen Standard, d.h., die Belegung ist: a-Ader auf Pin 3 und die b-Ader liegt
auf Pin 4. Beachten Sie das, falls Sie eine andere Telefonanschlussschnur verwenden
wollen.
1. Kleinen Stecker des Netzkabels in die Buchse im Gehäuseboden der
Basis stecken.
2. Kabel in den Kabelkanal einlegen.
3. Steckernetzteil in die Steckdose stecken.
4. Kleinen Stecker des Telefonkabels in die Buchse im Gehäuseboden der Basis
stecken.
5. Telefonkabel in den Kabelkanal einlegen.
6. Telefonstecker (TAE) in die Telefondose stecken.
Wenn Sie im Handel ein anderes Kabel kaufen, achten Sie auf die richtige
Belegung der Telefonadern (Anschlussbelegung: 3-4)!
Mobilteil in Betrieb nehmen
1. Das Display ist durch eine Schutzfolie geschützt. Folie bitte abziehen.
2. Akkufach öffnen, indem Sie auf die Riffelung drücken und nach unten schieben.
3. Akkus richtig gepolt einlegen.
4. Akkufach schließen – Deckel nach oben schieben, bis er einrastet.
5. Mobilteil in die Basis legen und Akkus laden. Lassen Sie das Mobilteil zum
Laden ca. 3 Stunden in der Basis liegen.
6. Das Mobilteil meldet sich selbständig an.
Wie Sie weitere Mobilteile anmelden, finden Sie im Kapitel „Mobilteil an- und
abmelden“.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ventura fs twinset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ventura fs twinset in the language / languages: German as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info