135583

AEG vcr 4500 Manual

76
Zoom out
Zoom in
Previous page
1/80
Next page
12 EN
same time on the same channel every week. While the
month digit is flashing, press
PLAY/o or STOP/L
repeatedly to select “W-MO” (Example: every monday).
5) For once-only recording only : Press PLAY/o or STOP/L
repeatedly until your desired day appears.
6) Press
PLAY/o or STOP/L repeatedly until the relevant
start hour appears. Next, enter the minute digit.
7) Press PLAY/o or STOP/L repeatedly until the relevant
end hour appears. Next, enter the minute digit.
8) Press PLAY/o or STOP/L repeatedly until the relevant
channel number appears.
9) Press
PLAY/o or STOP/L repeatedly until the desired
tape speed appears.
10)Press F.FWD /B. Programme 1 is now completed.
•To set another timer programme, repeat steps
3) to 10).
11)Press
MENU to exit.
12)Press
FUNCTION to activate the timer.
The
w indicator on the display comes on.
To Stop a Timer Programme which has Already
Started
Press STOP/EJECT on the VCR.
Note: STOP/L on the remote control will not function in the
Timer Recording mode.
To Correct Timer Programmes
If you want to correct an automatic timer after you finished
setting programme,
1) Repeat steps 1) to 3) in the “Timer Recording” section.
2) Select the setting you want to change using
F.FWD/B or
REW/s.
3) Enter the correct numbers using
PLAY/o or STOP/L,
then press
F.FWD/B.
4) Press
MENU to exit.
5) Press
FUNCTION to return to timer standby mode.
To Cancel or Check the Start/End Time
1) Repeat steps 1) to 2) in the “Timer Recording”.
2) Select a programme number you want to check using
PLAY/o or STOP/L. The details of selected programme
appears on the TV screen. You may cancel the entire
programme by pressing
REW/s.
3) Press
MENU to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Hint for Timer Recording
• If there is a power failure or if the VCR is unplugged for
more than 30 seconds, the clock setting and all timer
settings will be lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape and the
VCR power will be turned off. The w indicator will flash.
• If a tape is not in the VCR, timer recording cannot be
performed and the w indicator flashes. If an erase-
prevention tab of the tape is missing, the tape will be
ejected and the w indicator will flash. Please insert a
recordable tape.
• When all the Timer Recordings are completed, the w also
flashes. To play or eject the recorded tape, press
FUNCTION
first
, and then press PLAY/o or EJECT. To rewind the tape
to the beginning of the recorded programmes, press
AUTO RETURN on the VCR.
• The TV that is connected to your VCR may be turned on
or off when the VCR is in the Timer-recording mode.
• The VCR will only perform a timer recording after it has
been placed into timer standby mode.
Auto Return
Using the AUTO RETURN Button
When all the Timer Recordings are completed (the w
indicator flashes), press
AUTO RETURN on the VCR first. The
VCR will rewind to the beginning of the recorded
programme(s).
Note: If there are any remaining programmes, press
FUNCTION to turn on the VCR and then press
AUTO RETURN. In this case, if you press any other
button once and then press
AUTO RETURN, AUTO
RETURN will not be carried out.
Using the VCR Menu
If there are any remaining programmes including Daily,
Everyday, & Weekly, AUTO RETURN will not operate.
1) Press
MENU.
2) Press
PLAY/o or STOP/L repeatedly to point to “SET
UP”, then press
F.FWD/B.
3) Press
PLAY/o or STOP/L to point to “AUTO
RETURN”, then press
F.FWD/B.
[ON] will appear next to “AUTO RETURN”.
4) Press MENU.
Watch the Recorded Timer Programme
Press FUNCTION to turn on the VCR, then press PLAY/o.
Parents Lock
Parents Lock prevents use of the VCR by making the VCR
feature buttons on the VCR and the remote control
inoperative.
• The PWR indicator on the display comes on.
1) Press and hold down
FUNCTION on the remote control for
5 seconds until “PL” appears on the display. The Parents
Lock is activated.
When you want to cancel it, press and hold
FUNCTION on
the remote control again for 5 seconds.
When Parents Lock is activated:
• The time will appear on the display. “PL” will appear on
the display for two seconds every minute.
• You may insert a tape. However, the VCR power will
remain off.
• You may press EJECT to remove the tape (unless a timer
recording is programmed or has finished).
• Timer recording will take place as scheduled, even if
Parents Lock is activated. “P.L.” will appear steadily on the
TV screen during the timer recording.
MENU
TIMER
SET UP
INITIAL
TIMER NUMBER
1
START
END
DATE
CHANNEL
SPEED
--/--
--:--
--:--
--
--
9:00 10:00 11:00
Programme 1
Programme 2
Programme 3
HG462ED(EN).fm Page 12 Wednesday, March 3, 2004 7:49 PM
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG vcr 4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG vcr 4500 in the language / languages: German as an attachment in your email.

The manual is 4,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info