648290

AEG TBS TB 50 THERMO BODEN Manual

22
Zoom out
Zoom in
Previous page
1/76
Next page
22
Installation – for qualied contractors
9.8.1 Connecting additional heating mats
!
Material losses
Only connect additional heating mats in parallel.
» Make sure that the total current does not exceed the
maximum switching current and breaking capacity of
the temperature controller.
» Information can be found in the operating and instal-
lation instructions for the temperature controller.
10. Commissioning
10.1 Initial start-up
After installing the heating mat and applying tile adhesive
or levelling compound, you must wait at least 2 days be-
fore switching on the heating mat for the rst time.
» Switch on the heating mat for short periods over
several days once this initial drying phase has been
completed. This ensures that the tile adhesive and
levelling compound cure slowly.
» If you have laid impermeable synthetic oor cover-
ings, you must heat the oor for a period of approx.
36 hours. This ensures that there will be no residual
humidity left in the oor.
Note
Final commissioning can take place no sooner than
5 days after completion of the oor.
10.2 Commissioning report
» Make sure that you have completed the warranty
card and the installation diagram correctly. Observe
the following information:
◦ The installation diagram must show the exact posi-
tion of the heating mats, cold leads and temperature
sensor.
◦ Measured values from all three test measurements
must be entered on the warranty card.
» Enter the measured total resistance and insulation
resistance on both type plate labels.
» Attach the type plate label for the warranty card to
the specied position on this card.
» Attach the type plate label for the main junction box
in a highly visible location on this box.
11. Handover
Explain the functions of the appliance to the user. Draw
special attention to the safety instructions.
Hand over these operating and installation instructions
to the user.
Hand over the warranty card and installation diagram to
the user.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG TBS TB 50 THERMO BODEN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG TBS TB 50 THERMO BODEN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info