697581
8
Zoom out
Zoom in
Previous page
1/52
Next page
8 www.aeg.com
avoid hazard.
Always place the appliance on a at, level surface.
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
Never touch the blades or inserts with your hand or any tools while the
appliance is plugged in.
The blades and inserts are very sharp! Danger of injury!
Do not immerse the appliance in water or any other liquid.
Do not exceed the maximum lling volume as indicated on the appliances.
Never process boiling liquids (max 90 °C).
Do not use this appliance to stir paint. Danger, could result in an explosion!
Never operate appliance without lid.
Do not let the power cord touch hot surfaces or hang over edge of table or
counter.
Never use accessories or parts made by other manufactures not
recommended or sold; may cause a risk of injury to persons.
Do not grind hard or dry substances in the jug.
Keep hands and utensils out of the blender during operation to reduce the
risk of severe injury to persons or damage to the blender.
Ensure that the blender is switched o before removing it from the stand.
Do not attempt to remove the blade assembly.
Care shall be taken when handling the sharp cutting blades, emptying the
bowl and during cleaning.
Be careful if hot liquid is poured into the appliance as it can be ejected out
of the appliance due to a sudden steaming.
Switch o the appliance and disconnect from supply before approaching
parts that move in use.
If the product is left on without using any speed or programs, it will
automatically turn o after 5 minutes.
This appliance is intended for domestic use only. The manufacturer cannot
accept any liability for possible damage caused by improper or incorrect
use.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and o by the utility.
DO NOT OPERATE WITHOUT THE COVER IN PLACE.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG TB7-1-4CW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG TB7-1-4CW in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info