574006
21
Zoom out
Zoom in
Previous page
1/88
Next page
GB
21
Intended sites
The power inverter is intended for installation in:
Automobiles and lorries
Caravans
Boats
Do not place the power inverter:
near heat sources (radiators, direct sunlight), flammable materials, battery compartment or starter battery,
moist locations or locations exposed to dripping or splashing water,
in environments with explosion hazards.
SAFETY
Read all safety guidelines and instructions. Non-compliance with safety guidelines and instructions can cause electric
shock, fire and / or serious injury. Keep all safety guidelines and instructions for future reference.
Warning!
Risk of bodily or fatal injury to children! Risk of suffocation or strangulation! Keep the machine out of the
reach of children. Children are unable to assess the risks associated with use of this product!
Danger! Damaged leads may cause fatal electric shock. Discontinue use if leads are damaged.
The manufacture is not responsible for damages caused by:
Improper connection and/or operation.
External forces, damage to the device and/or damage to parts of the device due to mechanical impacts or overload.
Any type of modifications to the device. Using the device for purposes not described in these operating instructions.
Subsequent damages from improper and/or incorrect use and/or defective batteries.
Moisture and/or inadequate ventilation.
Unauthorised opening of the device. This will void the warranty.
Risk of fire and electric shock!
Failure to follow all instructions listed below may result in electric shock, fire, serious injury and damage to property.
Never use the cable to carry or pull the device.
Only unplug the cable from the outlet by the plug. The cable could be damaged.
If cables are to be routed through sharp-edged walls, e.g. metal walls, use empty tubes or cables ducts to avoid
damaging the cables.
Do not route 230 V main cables and 12 V/24 DC cables in the same empty tube (cable duct).
Do not use device if damaged. Damage to the device or the charging cable increases the risk of electrical shock.
Route the electrical cable so that it is not possible to trip over them and to prevent them being damaged.
Maintenance work must be done by qualified electricians.
Ensure that the device is always stored in a safe place. Do no expose the device to rain or wet conditions. Avoid
pouring or dripping water or other liquids over it. If water penetrates electrical devices, the risk of electric shock
increases.
Ensure that all plugs and cables are free of moisture. Never connect the device to the mains with wet or moist hands.
Only connect 230 V devices with permitted power plugs.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SW 2000 97123 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SW 2000 97123 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info