Manual AEG ST7-1-XXX (page 9 of 52) (English, German, Dutch, French, Portuguese, Spanish)

689121

Zoom out

Zoom in

1/52

www.aeg.com

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Soleplate is not heating even

though iron is turned on.

Connection problem Check main power supply cable, plug and

outlet.

Temperature setting is lower than

“OUTDOOR” position.

Select adequate temperature.

Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).

Selected temperature is lower than that

specied to use with steam.

Increase temperature to at least “

Linen”.

Steam boost and vertical steam

boost function does not work.

Steam boost function was used very

frequently within a short period.

Put iron on horizontal position and wait before

using steam boost function.

Iron is not hot enough. Adjust the proper temperature to steam

ironing (up to “

Linen”). Put iron in vertical

position and wait until temperature indicator

light turns o.

Water leaks from the soleplate

during ironing.

The iron is not hot enough. Set the temperature dial to a temperature

(“

Linen” to maximum) suitable for steam

ironing. Put the iron on its heel and wait until

the headlight is on before you start ironing.

Flakes and impurities come out of

the soleplate during ironing.

You have used hard water, which has

caused scale akes to develop in the

water tank. Clean the station with

descaler (see “Cleaning“, no 14).

Press and hold the steam button for about

one minute to get steam. Then hold one more

minute in order to clean the steam generating

system. Before starting ironing, please test

your iron on an old towel to ensure that no

residues inside the iron are transferred to your

garments.

Water leaks from the soleplate

while the iron is cooling down or

after it has been stored.

The iron has been put in horizontal

position while there is still water in the

water tank.

Empty the water tank and set the steam

control to “0” position before storing the iron.

Brown streaks come out of the

soleplate while ironing and stain

the linen.

You may have used chemical

descaling agents dierent from the

recommendation.

Use the descaling agent from the

recommendation (see “Cleaning”, no 14).

Fabric bers have accumulated in the

holes of the soleplate and are burning.

Clean the soleplate with a damp soft cloth.

Fabrics might not be properly rinsed or

the garments are new and have not been

washed before ironing.

Please rinse the fabrics properly before ironing.

DISPOSAL

This symbol on the product indicates that this product contains a battery which shall not be disposed with

normal household waste.

This symbol on the product or on its packaging indicates that the product may not be treated as household

waste. To recycle your product, please take it to an oicial collection point or to an AEG service center that

can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s

rules for the separate collection of electrical products and rechargeable batteries.

AEG reserves the right to change products, information and specications without notice.

Lavignia_Delicate_7000_SteamStation_AEG.indd 9 2018-09-18 12:53:34

Buenas tardes:
Tengo una duda.
¿El aparato me indica con alguna señal d que hay que cambiar el antical?
Les agradezco muchísimo su respuesta. Un saludo Submitted on 14-12-2020 at 19:01
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG ST7-1-XXX in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 6,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG ST7-1-XXX Manual

Product: