463223
3
Zoom out
Zoom in
Previous page
1/62
Next page
2
ENGLISH
ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Mains
connection
Brief description
15
0
B
A
III
II
I
0
Modifications: Text, diagrams and data are correct at the time of printing.
In the interest of continuous improvement of our products, technical
specifications are subject to alteration without prior notice.
The on-off switch can be fixed in the
On- position for continuous operation
by means of the locking button.
The on-off switch is shaped in such a way that it can be
used from the forward or the rear holding position.
The sawdust blower removes sawdust
ahead of the cut very practical when
sawing along a line.
Integrated suction channel for
connection to a
vacuum-cleaner.
The vibration damper permits quieter
running by means of a counterweight on the
plunger.
Transparent cover for
optimum sawdust
removal.
The stroke-rate (= movements per
minute of the saw blade) can be infinitely
varied by means of the adjustment
wheel.(not for ST 400, ST 440)
The anti-splintering device
almost entirely prevents the
edge of the wood from
splintering. (Accessory*)
The base plate can be tilted to both sides
by 45
o
for bevel cuts.
Integrated tool storage for spare
blade.
The built-in pendulum stroke improves the cutting
performance. The pendulum stroke of the saw blade
means it is only pressed against the material on the
reverse stroke (working stroke) and lifted off the
material on the forward stroke.
Result: better extraction of sawdust, lower friction
> higher cutting performance.
The pendulum stroke can be adjusted by the
pendulum stroke control and thus adapted to different
kinds of material. (not for ST 400, ST 440)
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ST 440 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ST 440 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info