574002

AEG ST 1200 97117 Manual

26
Zoom out
Zoom in
Previous page
1/88
Next page
26
Voltage converter installation
Install the power inverter with suitable screws (not included):
▪
in sturdy and even locations,
▪
on clean, dry and non-flammable surfaces,
▪
in well ventilated areas.
Please be sure not to cover the vents.
Remote control module installation
Mount the remote control module in a safe and accessible location using suitable screws (not included). Unwind the
entire remote control module (14) cable and plug the connector into the jack (11).
Connection to the power source
Caution!
As for how to connect the cables to the car electric system of your car, we strongly recommend you have this done by
a qualified technician. Modern cars boast very complicated electric panels. It might be hazardous for a non qualified
person to deal with such connections. A erroneous connection might damage your car and put you and people around
in danger.
Once connected the unit may sound an alarm, which is normal.
To a car battery
Warning!
Risk of short circuits! Always observe the correct polarity. Avoid short circuiting the battery poles.
1. Unscrew the red and black terminal screw at the back of the device.
2. Place the red cable with the lug (15) and the washer onto the red terminal (2) and screw tight with the red terminal
screw.
3. Place the black cable with the lug (14) and the washer onto the black terminal (1) and screw tight with the black
terminal screw.
4. Connect the red cable with the ring lug/clamp (13, 15) to the positive battery terminal (marked “P” or “+”) .
5. Connect the black cable with the ring lug/clamp (12, 14) to the negative battery pole “marked “N” or “-”).
Warning!
Risk of electric shock in the event of a defect in the unit without the earth connected.
6. Connect the earth connector (4) to the available earth system (e.g. vehicle body or, for stationary use, the potential
equalisation bar or ground spike) using a suitable cable (not included).
USE
Attention!
Some external devices, especially radios and/or other audio and chargeable devices can damage the power inverter
and/or the connected external appliance. Check to see whether the external appliance connected to the power inverter
“hums”, overheats or heats excessively up in the first few minutes. If this is the case, disconnect the external appliances
and all cables immediately. In this case the external appliance are incompatible and cannot be operated with each
other. If anything should be unclear, consult the dealer of the external appliance.
You may use both 230 V sockets (6) and the USB port (10) simultaneously. The total rated voltage for both devices
connected to the 230V socket and the USB port must not exceed the rated power of the voltage converter (see “Tech-
nical Data”).
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG ST 1200 97117 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG ST 1200 97117 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info