551777
37
Zoom out
Zoom in
Previous page
1/66
Next page
English
37
Listening to the Radio
1. Turn the device on by the POWER / ALARM OFF but-
ton (7).
2. Use the function selector switch (5) to choose the
desired frequency band.
VHF = FM, Medium wave = AM (Mono)
3. Tune in the desired station with the station adjust-
ment knob TUNING (6).
4. If reception is too weak, change the position of the
dipole antenna in order to improve the reception.
5. An aerial is integrated into the device for the recep-
tion of AM stations. The machine can be aligned
to the station by turning it. In this frequency band
programs are transmitted in „mono“ only.
Alarm function
Setting of the Alarm (24 h)
It is possible to set up to two alarm times as follows:
Press the ALARM 1 button (18). The alarm time that
is currently set  ashes in the display and the ALARM
1 indicator lamp lights up. The  rst alarm time is
active.
Then keep the SKIP ̈̈I / HOUR and SKIP İ̇ /
MINUTE buttons (7/6) pressed to set the desired
alarm time.
ޥ NOTE:
After approx. 5 seconds the numbers stop  ashing and
the time currently displayed is automatically stored.
In order to set the second alarm time press the ALARM
2 button (16). Proceed as described above in order to set
the second alarm time.
Deactivating the Alarm Time
Press the ALARM 1 or ALARM 2 button to deactivate the
alarm time. The indicator lamp ALARM 1 or ALARM 2
goes o .
Radio alarm
After you have set the alarm time and selected a radio
station, turn the device o by the POWER / ALARM OFF
button (7).
ޥ NOTE:
As soon as the alarm time is reached, the radio is
switched on. The selected radio station plays at the set
volume.
Buzzer alarm
If you do not wish to be woken up by the radio, turn
the function selector switch (5) to BUZZER.
Instead of the radio, the buzzer goes o when the
alarm time is reached.
Waking up to a CD
In order to be woken up by an inserted CD, move the
function selector switch to the “CD” position. Ensure
that the CD is correctly inserted in the CD compart-
ment.
As soon as the set alarm time is reached the CD
player switches on automatically. Playback is started
at the set volume.
Turning o the Alarm
Press the POWER / ALARM OFF button (7) in order to
switch o the alarm.
Automatic Alarm Interval
The automatically set alarm function can be shut o for
approximately 6 minutes with the SNOOZE key (13). The
ALARM 1 or ALARM 2 indicator lamp  ashes.
Delayed Switch-o (SLEEP Button (17))
Here you can set the time after which the device
switches to standby. You can choose between 90 min.,
60 min., 30 min. and 15 min. Press the SLEEP button
repeatedly until the desired length of time is shown in
the display. The SLEEP indicator lamp lights up. After
the time that has been entered has elapsed the device
switches o automatically.
The switch-o time can be reset afterwards by pressing
the SLEEP button (17) again.
This function can be cancelled with the POWER / ALARM OFF
key (7).
Playing CDs
This is how you play a CD
1. Turn the device on by the POWER / ALARM OFF but-
ton (7). Turn the function selector switch (5) to the
„CD“ position.
2. Open the CD compartment (1) by pulling the lid
upwards by the tab (4).
3. Insert an audio CD with the printed side facing
upwards on to the central cone so that the CD clicks
into place and then close the lid of the CD compart-
ment.
4. „- -“ appears in the display followed by the number
of tracks. Press the PLAY/PAUSE button (11) in order
to play the CD.
5. Playback begins automatically with the  rst track on
the CD. The current time is shown in the display.
6. In order to remove a CD, please press the STOP /
CLOCK ADJ. key (15), open the CD compartment and
lift the CD out carefully.
Always keep the CD deck closed.
05-SRC 4324 CD AEG.indd 3705-SRC 4324 CD AEG.indd 37 21.04.2009 10:37:09 Uhr21.04.2009 10:37:09 Uhr
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SRC 4324 CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SRC 4324 CD in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info