463226
5
Zoom out
Zoom in
Previous page
1/62
Next page
4
ENGLISH
ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
The stroke-rate (= movements per minute
of the saw blade) can be infinitely varied
by means of the adjustment wheel.
The letters A to G are printed on the speed
control, meaning:
A = lowest stroke rate
G = highest stroke rate
The stroke rate appropriate to the material
being worked on can be taken from the
following table, and the corresponding
letter shown on the setting wheel.
Material Stroke rate
Wood G
Steel D-E
Aluminium D-E
Rubber A-C
By adjusting the pendulum action the cutting depth of the saw blade teeth is
increased or decreased. As a rule of thumb:
Soft material Large pendulum stroke
Hard material Small or no pendulum stroke
Clean cut surface No pendulum stroke
The appropriate degree of pendulum effect can be taken from the following chart
and compared with the marking at the pendulum stroke lever.
Material Degree of swing action
Wood I - III
Plastic I
Aluminium 0 - I
Steel 0
Ceramics 0
Rubber 0
The stroke rate shown in the chart is only
a suggestion for your general guidance!
The stroke rate can be set on the stroke
rate control even while the motor is
running.
Only operate the machine with suitable
sawdust removal.
The integrated suction channel has the
standardized internal diameter of 30 mm.
Use the suction hose (Id. No.
4932 3304 12) from our range of
accessories to connect it to a household
vacuum cleaner or to an wet-and-dry
vacuum cleaner.
1. Push in and turn the suction hose into the
suction channel until it fits firmly.
2. Push the transparent cover downwards to
ensure optimum sawdust removal.
Adjusting the
stroke rate
(only applicable
for
STEP 420
STEP 450
SPE 70
SPE 80 A)
Adjusting the
pendulum stroke
(only applicable
for
STEP 420
STEP 450
SPE 70
SPE 80 A)
Sawdust removal
B
A
15
0
III
II
I
0
15
0
III
II
I
0
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SPE 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SPE 70 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info