486527
12
Zoom out
Zoom in
Previous page
1/42
Next page
10
8.8 Switching the Handset On/Off
tPress and hold
for more than 2 seconds to switch the handset on or off in standby mode.
>The display will show “SEARCHING...” until the handset finds the base.
Note:
You can switch the handset off to save battery life, if the handset is not on the base or a charger pod
and you do not want to use it for a while.
Important:
When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring
when there is an incoming call. To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
8.9 To Lock/Unlock the Keypad
You can lock the keypad to avoid making calls or pressing the keys accidentally.
tIn standby mode, press and hold
key for 2 seconds to lock the keypad.
>The handset displays “KEYS LOCKED”.
tTo turn the keypad lock off, press and hold
again.
Note:
Incoming calls can still be answered even if the keypad is locked.
8.10 Make an Internal Call
The system allows an intercom call between two handsets registered to the same telephone base, or a
cordless handset and the corded handset. It also allows you to transfer external calls from one handset
to another, and set up a 3-way conference with two handsets and an external call.
If you try to make a call while another handset is already on an external call, you will hear a busy tone
for a few seconds before the display returns to standby.
8.11 Initiate an Intercom Call to the Corded Base
tIn standby mode, press
.
>Intercom with the corded base is established immediately if there is only one registered cordless
handset.
>If there are more registered cordless handsets, the handset numbers which are available for
intercom will be displayed. Press 0 to call the corded base.
tPress
or pick up the corded handset from the corded base to answer the internal call, where both
internal callers can talk.
tTo end the intercom call, press
on the corded base or return the corded handset to the cordless
base.
Note:
If there is no answer from the corded base, or you wish to cancel the intercom call before it is answered,
press
to return to the external call.
8.12 Initiate an Intercom Call with another Registered Cordless Handset
tIn standby mode, press
.
>The handset numbers which are available for intercom will be displayed.
tPress the handset number you wish to call, or press
to call all handsets, including the corded
base.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Solo Combo 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Solo Combo 15 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Solo Combo 15

AEG Solo Combo 15 Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info