518218
12
Zoom out
Zoom in
Previous page
1/227
Next page
10
8.10 Initiate an Intercom Call to the Corded Base
tIn standby mode, press
.
>Intercom with the corded base is established immediately if there is only one registered cordless
handset.
>If there are more registered cordless handsets, the handset numbers which are available for
intercom will be displayed. Press 0 to call the corded base.
tPress
or pick up the corded handset from the corded base to answer the internal call, where both
internal callers can talk.
tTo end the intercom call, press
on the corded base or return the corded handset to the cordless
base.
Note:
If there is no answer from the corded base, or you wish to cancel the intercom call before it is answered,
press
to return to the external call.
9 USING YOUR CORDED BASE
9.1 Make a call
9.1.1 Pre-dialling
tIn standby mode, enter the phone number (maximum 24 digits).
tIf you make a mistake, press
to delete the last digit entered.
tPick up the corded handset from the base unit or press
to dial the number.
tWhen you complete the call, return the handset to the corded base unit or press
.
9.1.2 Direct dialling
tPick up the corded handset from the base unit or press
.
tListen for the dial tone and then enter the phone number.
tWhen you complete the call, return the handset to the corded base unit or press
.
9.2 Adjust Earpiece or Speaker Volume
There are 5 volume levels.
During a call, press + or - to select from L1 to L5.
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
9.3 Set Ringer Volume
You can set the ringer volume on the corded base from L0 (ringer off) to L5.
tIn standby mode, press + or - to select the desired setting (each volume level will play as it is select).
Note:
The corded base will ring at the selected volume level when it receives an incoming call.
If you set ringer volume to L0,
will appear on the LCD and the corded base will not ring when it
receives an incoming call.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SOLO COMBO 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SOLO COMBO 10 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info