Manual AEG Solo 15 (page 18 of 28) (English)

486526

Zoom out

Zoom in

1/28

>The last stored detect number is displayed (if any).

•Enter the number you want to be detected (maximum 5 digits) and then press

to conﬁrm.

>A conﬁrmation tone is played.

•Press to “PREFIX” and press to select.

>The last stored preﬁx number is displayed (if any).

•Enter the number you want the detected number to be replaced with (maximum 10 digits) and then

press

to conﬁrm.

>A conﬁrmation tone is played.

•Press

to return to standby mode.

Note:

If the detect digit is not entered (blank), the preﬁx number will be automatically added to the pre-dial

number after T is pressed.

For numbers starting with *, # or P, the preﬁx number will not be added to the pre-dial number after T is

pressed.

14.6 Change the Recall Time

You may need to press F to send a Flash signal (also called Recall or Timed Break Recall) if you are

connected to a PBX. You should normally leave the Recall Time at its default setting, Short (100ms), as this

is the standard recall required in the telephone network. However, it can be changed to Medium (270ms)

or Long (600ms) if your telephone is connected to a PBX that requires a different recall time.

•From the home screen, press

•Press to “ADVANCED SET” and then press to select.

•Press to “RECALL TIME” and then press to select.

•Press to select “SHORT”, “MEDIUM” or “LONG” and then press to conﬁrm.

>A conﬁrmation tone is played.

•Press

to return to standby mode.

14.7 Set the First Ring

If you have subscribed to Caller Line Identiﬁcation service and do not wish to hear the phone ring before

the caller identiﬁcation is displayed, you can set the “FIRST RING” to “OFF”.

•From the home screen, press

•Press to “ADVANCED SET” and then press to select.

•Press to “FIRST RING” and then press to select.

•Press to select “ON” or “OFF” and then press to conﬁrm.

>A conﬁrmation tone is played.

•Press

to return to standby mode.

15 RESET THE UNIT

You can reset your phone to its default settings with this feature.

Note:

Upon reset, all your personal settings, call log and redial list entries will be deleted and the phone will

return to its default settings. However, your phonebook will remain unchanged after reset. Also, if you have

an answering machine model, any recorded messages will remain unchanged, while all other settings will

be reset.

•From the home screen, press

•Press to “ADVANCED SET” and then press to select.

•Press to select “RESET” and then press to select.

•Press again to conﬁrm.

>A conﬁrmation beep is played and the unit is reset to its default settings.

I just plugged in my AEG Solo 15 and I cannot hear a dialtone. My phone has new batteries and the base station has power and is connected to the landline port but I have no diatone when I press the green button. When I use a different landline phone, I get a dial tone just fine. Submitted on 3-1-2023 at 08:26
Reply Report abuse
I have followed all instructions in installing the phone however I cant hear a dial tone nor the person I am talking to when using the earpiece but when I switch to speakerphone I can hear everything clearly -- I have already adjusted the volume to volume 3 and I still cant hear anything when it's not on speaker mode. Please help - thanks Submitted on 1-6-2022 at 17:29
Reply Report abuse
Where do I find a Manual for a Chamfer 215-4 phone set Submitted on 26-3-2022 at 08:55
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG Solo 15 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Solo 15

AEG Solo 15 Quick start guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 128 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG Solo 15 Manual

Product: