648285
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
Installation - for contractors
2.3 General safety instructions
!
WARNING Injury
The appliance may be used by children aged 8 and
up and persons with reduced physical, sensory or
mental capabilities or a lack of experience provided
that they are supervised or they have been instruct-
ed on how to use the appliance safely and have un-
derstood the resulting risks. Children must never
play with the appliance. Children must never clean
the appliance or perform user maintenance unless
they are supervised.

commissioning, maintenance and repair of the appliance.
We guarantee trouble-free function and operational re-
liability only if the original accessories and spare parts
intended for the appliance are used.
3. Appliance description

way of keeping pipework free from frost, particularly out-
doors. It consists of 2 supply conductors routed in parallel,
that are separated from each other by a special semicon-
ductor matrix.
At low temperatures the electrical resistance of the rib-
bon heater drops, causing the output to increase. At high
temperatures the resistance rises and the output drops.
The ribbon heater can be trimmed individually. The end
of the ribbon heater can be appropriately resealed with
the terminators provided.
Note
The use of higher ranking control units is advisable
as these can save energy, keep process tempera-
tures constant and protect the ribbon heaters.
» If in doubt, consult our service department.
4. Installation
4.1 Protective measures
WARNING Electrocution
We strongly recommend the use of an RCD (30 mA).
» If you are using the ribbon heater on metal, make
sure you protect the ribbon heater against indi-
rect contact to DIN VDE 100, part 410 prior to
commissioning.
» Protect the ribbon heater against mechanical and
chemical damage.
4.2 Preparations
» 
the pipe is freely accessible.
» 

optimal heat distribution.
4.3 Installing the heating circuit
!
Material damage
Keep the ribbon heater away from any sharp edges

the ribbon heater and surrounding areas.
Note
There is no danger of overheating if ribbon heaters
overlap or touch.
» Remove sharp burrs or any other roughness from the
surface you will be heating.
» Clean and degrease the surface you will be heating.
Power supply
WARNING Electrocution
Carry out all electrical connection and installation
work in accordance with relevant regulations.
!
Material damage
Observe the type plate. 
match the mains voltage.
D0000032847
» To prevent condensate from the pipe entering the
standard socket, form a "drip loop" with the power
cable.
Positioning the thermostat
The thermostat measures the temperature of the pipe and
switches the ribbon heater on and off as required.
D0000032852
» 
pipe at the coldest end of the pipe. -
ing materials for this purpose, such as fabric tape,
aluminium adhesive tape or temperature-resistant
cable ties.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SLH ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SLH ST in the language / languages: English, German as an attachment in your email.

The manual is 7,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info