Manual AEG SK150 - 97201 (page 14 of 52) (English, German, French, Italian)

574023

Zoom out

Zoom in

1/52

ASSEMBLY

Only install the windscreen de-icer if the vehicle has a 12-V on-board power

supply and the vehicle power socket is equipped with a minimum 15 A fuse.

Warning!

▪

Mortal danger! Do not mount the windscreen de-icer within the airbag

inflation area or in the head impact zone of people seated in the vehicle.

▪

Mortal danger! Do not mount the windscreen de-icer so that it impedes the

view of the driver in any way.

▪

Mortal danger! Do not mount the windscreen de-icer so that it can become

unattached during strong braking action or when negotiating tight curves.

▪

Danger of overheating! Select the mounting position so that the air inlet and

outlets cannot be blocked.

1. Select a suitable position in the vehicle to mount the unit and make sure that

it is dry and free from dust and fat.

2. Remove the protective foil from the hook-and-loop-fasteners and attach the

fasteners to the base of the holder.

3. Remove the other protective foil from the hook-and-loop-fasteners and

press the windscreen de-icer, together with the holder, onto the intended

mounting position.

4. Lay the connector cable to the 12-V vehicle socket. Lay it so that it does not

impede access to the pedals or steering wheel. Do not lay the cable over

sharp edges or hot areas.

You can also use the enclosed screws to affix the windscreen de-icer.

Make sure that you do not damage other cables or parts when you screw in

the screws or drill holes for them.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG SK150 - 97201 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG SK150 - 97201 Manual

Product: