781378
27
Zoom out
Zoom in
Previous page
1/60
Next page
4. CONTROL PANEL
1 2
4 3
2 5242321
7 6
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. Frostmatic indicator
4. Freezer compartment indicator
5. Fridge compartment indicator
6. ON/OFF button
Compartment selection button
7. Frostmatic button
Temperature regulator
4.1 Switching on
1. Insert the plug into the wall socket.
2. Touch the ON/OFF button (6) if all
LED indicators are off.
4.2 Switching off
Keep touching the ON/OFF button (6) for
3 seconds.
All indicators light off.
4.3 Temperature regulation
Before regulating the temperature, it is
necessary to select the compartment
(fridge or freezer).
The upper or lower cavity is selected by
the compartment selection button (6).
To select the freezer compartment touch
the compartment selection button (6)
until LED corresponding to the upper
cavity lights up.
The temperature LED indicator shows
the latest set temperature.
Recommended setting is -18°C.
To select the fridge compartment touch
the compartment selection button (6)
until LED corresponding to the lower
cavity lights up.
The temperature LED indicator shows
the latest set temperature.
Recommended setting is +4°C.
To set temperature:
1. Touch temperature regulator button
(7).
Current temperature indicator blinks.
2. Any time you touch the temperature
regulator button (7), the setting
moves by one position. When you
select a temperature, the LED
corresponding to selected
temperature value blinks for a while
and the setting is fixed.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
4.4 Frostmatic function
The Frostmatic function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time,
protects food products already stored in
the freezer compartment from
undesirable warming.
To freeze fresh food activate
the Frostmatic function at
least 24 hours before placing
the food to complete pre-
freezing.
To activate Frostmatic function press the
Frostmatic button (7) for 3 seconds. The
Frostmatic indicator switches on.
This function stops
automatically after 52 hours.
It is possible to deactivate the function at
any time by pressing Frostmatic button
(7) for 3 seconds again. The Frostmatic
indicator switches off.
ENGLISH 27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SDB412E1AS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SDB412E1AS in the language / languages: English, Danish, Spanish as an attachment in your email.

The manual is 0.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG SDB412E1AS

AEG SDB412E1AS User Manual - German, Dutch, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info