Manual AEG SB2E 750 R (page 4 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463190

Zoom out

Zoom in

1/84

ENGLISH

SBE 600 R, SB2E 680 R, SB2-700, SB2E 700 R, SB2E 700 RS, SB2E 705 PLUS, SB2E 750 R, SB2E 760 R

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

The electronic drill/screwdriver can be universally used for drilling, percussion drilling,

screwdriving and cutting screw threads.

Do not use this product in another way as stated for normal use.

Always disconnect the plug from the socket before carrying out any work on the

machine.

1. Usually, the chuck can be removed by

hand: steady the drill spindle with a fork

wrench and unscrew the chuck by turning

it anti–clockwise.

2. Should the chuck be stuck on the drill

spindle, fit another fork wrench to the

chuck and the drill spindle (see illustration)

or fix an Allen key in the chuck.

If necessary, hit the key shaft lightly with a

plastic hammer.

3. Mount the chuck in reverse order.

Under high strain in anti–clockwise

operation, the chuck might become loose.

Please use the bit reception to loosen screws in anti–clockwise operation. (not for

SB2–700)

Completely insert the tool shaft into the

open chuck.

Hold the grip and firmly tighten the chuck

by turning the sleeve in the ”GRIP”

direction.

After the clamping jaws have tightened

around the tool shaft, turn the chuck a

further 1/4 in order to let the chucking

power retention engage. Only than can the

tool itself be chucked by vigorously turning the sleeve in the “GRIP” direction (it

engages audibly with a grating noise.)

The chucking power retention is mainly needed for percussion drilling.

When the chuck is opened with a strong jerk as far as it will go, it is possible that it

can’t be closed anymore. Instead, ”grating” can be felt (as if the chuck were

over–tightened). In this case turn the sleeve once more in the ”RELEASE”

direction; now it can be closed again. The chuck is not damaged by this ”grating”.

When percussion drilling in stone the drill bit should be checked for tight seat in the

chuck after first use. If necessary, re–tighten the chuck by hand.

Mains

connection

Use

Keyless chuck

(according to

standard

equipment)

Changing the

keyless drill

chuck

Inserting the tool

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG SB2E 750 R in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG SB2E 750 R Manual

Product: