775136

AEG SB29XX Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
6
www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Spill-proof drinking lid with carry handle
B. Blend Bottle
C. Blender blade assembly
D. Speed selector
E. Blender Base
F. Power Cord
G. Mini bottle/grinder jar*
H. Grinder blade assembly*
I. Cooling stick*
J. Cooling stick cap*
K. Chopper base*
L. Chopper base shaft*
M. Chopper blades*
N. Chopper jar*
* Certain models only
Picture page 2-3
GETTING STARTED
1 Before first use: Clean the blender according to the instructions in “Cleaning and Care”. Fill the bottle with ingredi-
ents.
Caution! Do not exceed the maximum filling volume: 600 ml for the blend bottle (B) and 300 ml for the mini bottle/
grinder jar (G). Do not mix dough, mashed potatoes, meat etc.
2 Fill the ingredients in either bottle. Fasten the blender blade assembly (C) on the open end of the bottle by turning
it clockwise.
Caution! The blades and inserts are very sharp!
3 Place the blender base on a flat, level surface. Plug into a power outlet.
4 Turn the bottle upside down. Push down the bottle into the blender base (E) and rotate it clockwise to lock.
Note: When locked, the symbol on the blender blade assembly should be aligned with the symbol on the
blender base.
Caution! To reduce risk of injury, never place the blade assembly on the base without the bottle properly attached.
5 Turn the speed selector (D) to 1 or 2 according to the recipe/preference. Turn the speed selector to “PULSE” for
short bursts of power.
Caution! If the motor stalls, turn the blender o immediately, unplug the appliance and let it cool for at least 10
minutes.
6 When the ingredients are fully mixed: Turn the speed selector to “OFF” to stop mixing. Make sure the motor has
stopped completely, then press the bottle down and turn it counter-clockwise to release it. Remove the bottle from
the blender base and turn it upside down. Replace the blade assembly with the drinking lid (A).
USING THE COOLING STICK*
The cooling stick cools down and maintains the temperature of your freshly prepared blends.
7 Unscrew the cap (J) of the cooling stick (I) and fill it with tap water until the MAX mark. Screw the cap back on
the cooling stick and place it in the freezer until the water freezes.
8 Screw the frozen cooling stick on the drinking lid with carry handle (A). Attach it on the blend bottle (B). The
cooling stick can be cleaned in a dishwasher.
Note! The cooling stick does not fit the mini bottle (G).
USING THE GRINDER*
9 Fill the ingredients in the mini bottle/grinder jar (G). Fasten the grinder blade assembly (H) on the open end of the
bottle by turning it clockwise.
Caution! The blades and inserts are very sharp!
10 Turn the bottle upside down. Push down the bottle into the blender base (E) and rotate it clockwise to lock.
Note: When locked, the symbol on the grinder blade assembly should be aligned with the symbol on the blender
base.
Caution! To reduce risk of injury, never place the blade assembly on the base without the bottle properly attached.
USING THE CHOPPER*
SB29xx_Sportblender_AEG NO-FARSI CS6.indd 6 17.07.17 23:34
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SB29XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SB29XX in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 6.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info