775133

AEG SB24XX Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
6www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Spill-proof drinking lid
B. Spill-proof drinking lid with carry handle*
C. Blend bottle
D. Blade assembly
E. On-O button
F. Blender base
G. Power cord
H. Cooling stick*
I. Thermo cover*
* Certain models only
Picture page 2-3
GETTING STARTED
1 Before rst use: Clean the blender according to the instructions in “Cleaning and Care”. Fill the bottle with ingredi-
ents. Caution! Do not exceed the maximum lling volume: 600 ml. Do not mix dough, mashed potatoes, meat
etc.
2 Fasten the blade assembly on the open end of the bottle, by turning it counterclockwise. Caution! The blades and
inserts are very sharp!
3 Place the blender base on a at, level surface. Plug into a power outlet.
4 Turn the bottle upside down. Push down the bottle into the blender base and rotate it counterclockwise to lock.
Note: When locked, the symbol on the blender assembly should be aligned with on the blender base. Cau-
tion! To reduce risk of injury, never place the blade assembly on the base without the bottle properly attached.
5 Push and hold the On-O button to start mixing. The indicator light will illuminate until the On-O button is
released. Release the On-O button to stop mixing. Caution! If the motor stalls, turn the blender o immediately,
unplug the appliance and let it cool for at least 10 minutes.
6 When the ingredients are fully mixed: Release the On-O button to stop mixing. Make sure the motor has stopped
completely, then turn the bottle clockwise to loosen it. Remove the bottle from the blender base. Replace the blade
assembly with the drinking lid.
USING THE COOLING STICK* (*CERTAIN MODELS ONLY)
The cooling stick cools down and maintains the temperature of your freshly prepared blends.
7 Unscrew the cap of the cooling stick (H) and ll it with tap water until the MAX mark. Screw the cap back on the
cooling stick and place it in the freezer until the water freezes.
8 Screw the frozen cooling stick on the drinking lid with carry handle (A). Attach it on the blend bottle (C).
The cooling stick can be cleaned in a dishwasher.
USING THE THERMO COVER* (*CERTAIN MODELS ONLY)
9 Thermo cover performance: Keeps liquids at the same temperature longer, whether cold or hot beverages.
Place the bottle into the cover and close the zipper.
CLEANING AND CARE
10 Unplug the appliance. The Tritan plastic bottle and lid are dishwasher-safe. Please wash the blades by hand.
Caution! The blades and inserts are very sharp!
11 Clean the blender base with a damp cloth. Caution! Never immerse the blender base in water! Do not use abrasive
cleaners or scouring pads when cleaning the appliance.
Enjoy your new AEG product!
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SB24XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SB24XX in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info