563599

AEG SB1130 Manual

26
Zoom out
Zoom in
Previous page
1/64
Next page
26
Pour lancer de la neige
La rotation de la vis sans fi n est contrôlée par le levier de com-
mande de la vis sans fi n (B) situé sur le côté droit du bouton.
• Exercer une pression sur le levier de commande de la
vis sans fi n vers la poignée pour embrayer la vis sans fi n
et lancer de la neige.
• Relâchez le levier de commande de la vis sans fi n pour
cesser de jeter de la neige.
Lanzar la nieve
La rotación de la barrena se controla con la palanca de mando
de la barrena (B) posicionada en la empuñadura derecha.
• Apretar la palanca de mando de la barrena hacia la
empuñadura para conectar la barrena y lanzar nieve.
• Soltar la palanca de mando de la barrena para parar de
lanzar nieve.
Het sneeuwruimen
De boorrotatie wordt geregeld door de stuurknuppel van de
boorregeling (B), die aan de rechterkant van de hendel is
bevestigd.
• Knijp de knuppel in om de boor in te schakelen en te
besturen en ruim de sneeuw.
• Laat de knuppel los om het sneeuwruimen te stoppen.
Per spazzare la neve
La rotazione della coclea è controllata dalla leva di controllo del-
la coclea (B), che è situata sul lato destro dell’impugnatura.
• Premere la leva di controllo della coclea verso l’impugnatura
per inserire la coclea e spazzare la neve.
• Rilasciare la leva di controllo della coclea per arrestare
l’azione dello spazzaneve.
To throw snow
The auger rotation is controlled by the auger control lever (B) located on
the right side handle.
• Squeeze the auger control lever to the handle to engage the auger
and throw snow.
• Release the auger control lever to stop throwing snow.
Das schneefräsen
Die Rotation der Einzugsschnecken wird mit Hilfe des Bedienungshebels für
die Einzugsschnecken (B) gesteuert, welcher sich am rechten Griff befi ndet.
• Drücken Sie den Bedienungshebel für die Einzugsschnecken an, um
die Einzugsschnecken zu aktivieren und Schnee zu fräsen.
• Lassen Sie den Bedienungshebel für die Einzugsschnecken los, um
das Schneefräsen zu stoppen.
B
To move forward and backward
SELF-PROPELLING, forward and reverse movement of the snow thrower,
is controlled by the traction drive control lever (A) located on the left side
handle.
• Squeeze traction drive control lever to handle to engage the drive
system.
• Release traction drive control lever to stop the forward or reverse
movement of the snow thrower.
SPEED and DIRECTION are controlled by the drive speed control lever
(L).
• Press downward on the speed control lever and move lever to desired
position BEFORE engaging the traction drive control lever. Be sure
lever springs back and locks into desired position.
CAUTION: Do not move speed control lever when trac tion drive con trol
lever is engaged. Damage to the snow thrower can re sult.
• Slower speeds are for heavier snow and faster speeds are for light
snow and transporting the snow thrower. It is recommended that you
use a slower speed until you are familiar with the operation of the
snow thrower.
NOTE: When both traction drive and auger control levers are engaged, the
traction drive control lever will lock the auger control lever in the engaged
position. This will allow you to release your right hand from the handle
and adjust the discharge chute direction without interrupting the snow
throwing process.
A
L
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SB1130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SB1130 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info