697583

AEG SB 7 series Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
6
www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Jug
B. Spout
C. Lid with ller hole
D. Measuring cup
E. Rubber seal
F. Blade assembly, detachable
G. Locking collar
H. Motor housing
I. Control panel
J. Non-slip feet
Picture page 2-3
GETTING STARTED
1 Before using the blender for the rst time, wash all parts except for the motor housing. Assembling: Place the
blade rubber seal on top of the blade assembly (A). Then place the blade assembly with the rubber seal into the col-
lar (B). Carefully assemble the blades and collar into the jug. Tilt the collar slightly for easy access of knives into the
jug. Once in place, turn the collar counter-clockwise to lock in place (C ).
2 Place the blender on a at surface and then place the jug on top of the motor housing. The jug can be placed is
several dierent positions with handle on either sides, or in front. Put the ingredients in the jug.
(Do not exceed the maximum level as indicated on the jug.)
3 Close the lid (A) and insert the measuring cup in the ller hole and (B) lock into position. (You can use the measur-
ing cup to add ingredients while the blender is running. Close the ller hole immediately after, to avoid splashing.)
Caution! When processing hot liquids, see paragraph 4.
4 Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before lling the jug. Fill the
jug only half full and start processing on low speed. The blender jug can become very warm – take care to protect
your hands and to ventilate steam out through the ller hole. Always replace the lid before use.
5 Start the blender:
Plug into mains. Press the On/O button
(A)
, the LED light will illuminate. Press the “Low”
(B)
or
“High”
(C)
button to select your desired processing speed, or choose one of 3 special functions. Light will indicate the
speed selected. To pause, press the selected speed button again.
Auto-O:
If the machine is not turned o manually, the Safety Auto-O function turns it o after
30
minutes.
6 Pulse Function: Press the “Pulse” button (A) when you need a short burst of power.
Smoothie Function: Press the “Smooth” button (B) to get ice crushed and your smoothie blended to the desired
consistency.
Crush Ice Function: Press the “Crush” button (C) to crush ice.
(For best results, work in small batches.)
CLEANING AND CARE
7 Quick cleaning:
Pour warm water into the jug, add a few drops of detergent. Mix water and detergent by pressing the
“PULSE” button. Finally, rinse the jug under running water.
8 Thorough cleaning:
Turn the blender o and unplug the power cord. Wipe the motor housing with a damp cloth.
Warning!
Never immerse the housing, plug, and cord in water or any other uid.
9 Remove the lid and jug.
Turn the collar clockwise to unlock. Then carefully remove the collar and knives by pulling the collar downwards. Lift
o the blade assembly and the rubber seal from the collar. Rinse the blade assembly in water and detergent.
Caution! Handle carefully, the blades are very sharp!
The lid, jug and measuring cup can be washed in the dish-
washer.
Enjoy your new AEG product!
SB7XXX_Pragati_Blender_AEG_NEW NO-FARSI.indd 6 2017-07-06 15:17:15
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG SB 7 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG SB 7 series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info