11343
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
8mm
PR34
Open both the appliance door and
that of the kitchen unit to approx.
90¡. Place the little plates over the
runners. Hold the doors of the
appliance and the unit together
and mark the holes.
PR35
Remove the little plates and make
the holes with a diam. of 2 mm.
Replace the little platee over the
runners and screw in the screws
provided (3.5x16 mm).
For the alignment of the kitchen
unit door, if necessary, use the
clearance size of the slotted holes.
At the end of the procedure, check
that the doors of the appliance and
the kitchen unit open properly.
D735
E
E
If the appliance is fixed to the side
of the kitchen unit, simply slacken
the screws in the fixing brackets
(E), move the brackets as shown
in the figure and re-tighten the
screws.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Santo 2992-4i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Santo 2992-4i in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info