722671
13
Zoom out
Zoom in
Previous page
1/52
Next page
1313
NL
PT
ES
FR
GB
DE
Emptying the Dust container, Replacing/Cleaning the Filter / Leeren des Staubbehälters, Austausch/Reinigung des Filters
2. Remove the lter:
Remove the Dust container by swinging it upwards (B).
Open the lid by swinging it upwards.
Swing the Filter frame downwards (C).
Remove the lter (D).
3. Rinse the lter with cold water. Tap the lter frame to
remove water. Let dry for 24 hours before placing it back in
the machine.
1. For best performance, we recommend to clean the
lter every 5th cleaning and to replace it every 6 months.
(Ref: ARK2)
1. Empty the dust container regularly or when the dust
container icon lights up.
If the dust bin symbol remains lit up when the dust bin is
empty, please clean the lter.
2. Press Release button (A), remove the Dust container
by swinging it upwards (B).
Open the lid by swinging it upwards.
Empty the dust container into a waste bin.
Note: The dust container icon ashes to indicate that the
Dust container has been removed, or is not in the right
position.
3. After emptying the container, close the lid and put
it back in place
Ret the Dust container in the robot.
Note: If the Dust container has not been properly assembled
and Play/Pause button is pressed, the dust container icon
ashes. Ret the Dust container properly.
Emptying the Dust container
Cleaning the Filter
2. Nehmen Sie den Filter heraus:
Entfernen Sie den Staubbehälter, indem Sie ihn nach oben
klappen (B).
Önen Sie die Abdeckung, indem Sie sie nach oben
klappen.
Klappen Sie den Filterrahmen nach unten (C).
Nehmen Sie den Filter (D) heraus.
3. Spülen Sie den Filter mit kaltem Wasser ab. Klopfen
Sie auf den Filterrahmen, um das Wasser zu entfernen.
Lassen Sie ihn 24 Stunden trocknen, bevor Sie ihn wieder
in das Gerät setzen.
1. Für eine optimale Leistung empfehlen wir Ihnen
den Filter nach jedem 5. Reinigungsvorgang zu reinigen
und ihn alle 6 Monate auszutauschen.
(Ref: ARK2)
1. Leeren Sie den Staubbehälter regelmäßig oder wenn
das Staubbehälter-Symbol leuchtet.
Leuchtet das Staubbehälter-Symbol, obwohl der Behälter
leer ist, reinigen Sie den Filter.
2. Drücken Sie die Freigabetaste (A) und entnehmen
Sie den Staubbehälter, indem Sie ihn nach oben
klappen (B). Önen Sie die Abdeckung, indem Sie sie
nach oben klappen.Leeren Sie den Staubbehälter in einen
Abfalleimer. Hinweis: Das Staubbehälter-Symbol blinkt,
um anzuzeigen, dass der Staubbehälter entfernt wurde
oder sich nicht in der richtigen Position bendet.
3. Schließen Sie nach der Entleerung die Abdeckung
und setzen
Sie ihn wieder in den Roboter ein.
Hinweis: Wurde der Staubbehälter nicht richtig
zusammengesetzt und wird die Start-/Pause-Taste
gedrückt, blinkt das Staubbehälter-Symbol. Setzen Sie dann
den Staubbehälter richtig ein.
Leeren des Staubbehälters
Reinigung des Filters
A
B
C
D
A
B
RX9_Osiris_AEG.indd 13 2017-05-24 15:26:17
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG RX9-1 SGM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG RX9-1 SGM in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 12,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info