722671
8
Zoom out
Zoom in
Previous page
1/52
Next page
88 How to use the robot vacuum cleaner / Verwendung des Roboter-Staubsaugers
1. Place the Charging base on the floor against the wall.
Plug the adaptor to the power jack on the side of the base.
Connect the Power cord plug to the main socket. Wind up
excessive cord on the back of the base. Make sure there is
an empty area of 0.5 m on the sides and 1.5 m in front of
the Charging base.
WiFi model: Place the base in range of the WiFi router.
2. Place the side brush.
Note: If the robot is used to clean rooms with wall-to-wall
carpet, remove the side brush for best cleaning results.
3. Place the robot on the Charging base.
The Battery icon will pulse, to indicate that the robot is
recharging.
Installation of the robot vacuum cleaner
2. To preserve the battery life and performance:
- Always keep the robot charging when not in use.
- Charge it as soon as possible in the charging base after the
cleaning cycle. Waiting too long might affect the batteries.
3. Storage (not plugged): In case the robot is stored
without being charged for a longer period of time, remove
the batteries and store them separately. (Charge batteries
before removing them).
To remove the batteries see instruction page 15.
1. Red battery (A) indicates that the robot needs to get
charged.
Red light pulse (B): The robot is charging – Low
charging level.
White light pulse (C):The robot has charged enough to
be used. (Press Play/Pause button to clean.)
White light (D): The robot is ready for use.
Full charging time is ~
3 hours.
Battery/Charging status
A B C D
3. Setzen Sie den Roboter in die Ladestation.
Das Akku-Symbol blinkt, um anzuzeigen, dass der Roboter
aufgeladen wird.
Installation des Roboter-Staubsaugers
1. Stellen Sie die Ladestation auf dem Boden gegen die
Wand. Stecken Sie den Adapter in die Buchse auf der Seite
der Ladestation. Stecken Sie den Stecker des Netzkabels
in die Steckdose. Wickeln Sie das nicht benötigte Kabel
auf der Rückseite der Station auf. Stellen Sie sicher, dass
sich 0,5 m seitlich und 1,5 m vor der Ladestation keine
Hindernisse befinden. Wi-Fi-Modell: Stellen Sie die
Ladestation in Reichweite des Wi-Fi-Routers auf.
2. Setzen Sie die Seitenbürste ein.
Hinweis: Wird der Roboter zur Reinigung von Räumen mit
durchgehenden Teppichächen verwendet, nehmen Sie die
Seitenbürste heraus, um bessere Reinigungsergebnisse zu
erzielen.
2. Erhaltung der Akku-Lebensdauer und Leistung:
- Lassen Sie den Roboter in der Ladestation, wenn Sie ihn
nicht benutzen.
- Laden Sie ihn sobald wie möglich nach der Reinigung in
der Ladestation. Wenn Sie zu lange warten, könnte sich
dies auf die Leistungsfähigkeit der Akkus auswirken.
3. Lagerung (nicht eingesteckt):Wird der Roboter für
eine längere Zeit gelagert ohne aufgeladen zu werden,
nehmen Sie die Akkus heraus und lagern Sie diese separat.
(Laden Sie sie, bevor Sie sie herausnehmen.)
Bezüglich der Entnahme der Akkus siehe Anweisungen auf
Seite 15.
1. Das rote Akku-Symbol (A) zeigt an, dass der Roboter
geladen werden muss.
Rotes blinkendes Symbol (B): Der Roboter wird
geladen - niedriger Ladezustand.
Weißes blinkendes Symbol (C): Der Roboter ist
ausreichend aufgeladen, um verwendet zu werden.
(Drücken Sie die Wiedergabe-/Pause-Taste zum Löschen.)
Weißes Licht (D): Der Roboter ist einsatzbereit.
Die Zeit bis zur vollen Auadung beträgt ca. 3 Stunden.
Akku-/Ladezustand
0.5
m
0.5
m
1.5
m
RX9_Osiris_AEG.indd 8 2017-05-24 15:26:07
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG RX9-1 SGM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG RX9-1 SGM in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 12,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info