Manual AEG rc 4000 (page 44 of 68) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

122837

Zoom out

Zoom in

1/68

2. Press and hold the respective selection

key (e.g. ) until the LED extinguishes

brie y.

3. Activate the search function by

pressing the " “ key (18). The LED

will start to  ash.

4. As soon as the device responds (e.g.

switches o ), con rm by pressing the

selection key again (e.g.

). The LED

will  ash 4 times

Note:

• Con rmation of the device code must

take place within one second.

• The search mode can be ended at

any time by pressing the EXIT key (8).

The LED also  ashes 4 times rapidly;

the previously programmed code is

retained.

5. Check the function of the keys on the

device. If several of the keys do not

function or incorrectly, repeat the

search.

If this method proves unsuccessful,

use the Learn function to program the

remote control as described below.

Note:

Owing to the numerous di erent brands

on the market, complete programming of

all the functions of your original remote

control cannot be guaranteed.

Learn function

The universal remote control is able to

"learn" the individual key functions of

your original remote control. This function

can be used, e.g. when not all functions

are programmed via the "Code Search"

function.

Note:

Do not use the following keys for the

Learn function: Light (3), Record (10),

EXIT (8) and Selection keys (1).

1. Ensure that your original remote control

works perfectly.

2. Place both remote controls on a  at

surface and point both ends that are

normally aimed at the device towards

each other. The distance between both

remote controls should be 2 - 5 cm.

3. Press and hold the respective selection

key (e.g.

) until the LED extinguishes

brie y.

4. Press the " “ key (10).

5. Now press the key on the universal

remote control to be programmed.

6. Press and hold the respective key on the

original remote control until the LED

 ashes 4 times slowly. The programmed

key function is automatically stored.

Note:

• If programming is unsuccessful, the

LED will  ash 4 times rapidly.

• Neon light can in uence

programming.

7. Repeat steps 5 and 6 until all key

functions on the universal remote

control have been programmed.

8. Finally press the EXIT key to leave the

programming mode. The LED will  ash

4 times rapidly.

Delete programming

There is a possibility to delete individual

keys or all keys of a device.

Note:

Programming can only be deleted that

was carried out via the Learn function.

Delete individual keys

1. Press and hold the selection key for the

respective device (e.g.

) until the LED

extinguishes brie y. Subsequently press

the EXIT key (8).

2. Now press the key to be deleted. The

LED will  ash 4 times slowly.

3. Press the next key to be deleted.

4. When all required keys have been

leted, press the

to leave the

delete mode

The

LED will 

ash 4 times

rapidly.

Delete all keys of a device

1. Press and hold the "

“ key (10) until

the LED extinguishes brie y.

2. Press and hold the selection key of the

device, the keys of which are to be

deleted (e.g. ).

3. The LED will  ash 4 times slowly. All

keys stored under this selection key are

deleted.

English

slowly.

selection key of the de

vice

(e.g.

)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG rc 4000 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG rc 4000 Manual

Product: