Manual AEG PSB300 (page 23 of 64) (English, German, Dutch, French, Italian, Spanish)

563600

Zoom out

Zoom in

1/64

To control snow discharge

WARNING: Snow throwers have exposed rotating parts, which

can cause severe injury from con tact, or from ma te ri al thrown

from the discharge chute. Keep the area of op er a tion clear of all

persons, small children and pets at all times including startup.

WARNING: If the discharge chute or auger become clogged, shut-

off engine and wait for all moving parts to stop. Use a stick, NOT

YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the dis-

charge chute control lever (G).

• To change the discharge chute position (H), press downward on dis-

charge chute control lever and move lever left or right until chute is

in desired position. Be sure lever springs back and locks into desired

position.

The DISTANCE that snow is thrown is controlled by the position of the

chute deﬂ ector (J). Set the deﬂ ector low to throw snow a short distance;

set the deﬂ ector higher to throw snow farther.

• SB270, SB300, SB927, SB1130: Press downward on de ﬂ e c tor re-

mote control lever (K) and move lever forward to lower the deﬂ ector

and decrease the distance. Move lever back to raise the deﬂ ector

and increase the distance. Be sure lever springs back and locks into

desired position.

• SB240, SB524: To change the chute deﬂ ector position, loosen knob

and move deﬂ ector to desired position and tighten knob securely.

Regelung des schneeauswurfs

WARNUNG: Schneefräsen sind mit offenliegenden beweglichen

Teilen ausgestattet, die bei Berührung oder durch aus der Aus-

wurfrinne geschleuderte Fremdkörper ernsthafte Verletzungen

verursachen können. Halten Sie den Verwendungsbereich jeder-

zeit frei von jeglichen Personen, kleinen Kindern und Haustieren,

auch während des Startens.

WARNUNG: Sollten die Auswurfrinne oder die Einzugsschnecken

blockiert sein, stellen Sie den Motor ab und warten Sie, bis alle

beweglichen Teile stillstehen. Verwenden Sie einen Stock, NICHT

IHRE HÄNDE, um die Rinne und/oder die Einzugsschnecken zu

reinigen.

Die RICHTUNG, in welche der Schnee ausgeworfen wird, wird mit Hilfe

des Auswurfrinnen-Bedienungshebels (G) bestimmt.

• Um die Ausrichtung der Auswurfrinne (H) zu verändern, drücken Sie

den Auswurfrinnen-Bedienungshebel nach unten, und bewegen Sie

ihn nach links oder rechts, bis die Rinne in der gewünschten Stel-

lung ist. Stellen Sie sicher, dass der Hebel zurückschnellt und in der

gewünschten Position einrastet.

Die AUSWURFWEITE wird durch die Position des Auswurfrinnen-Ablen-

kblechs (J) bestimmt. Stellen Sie das Ablenkblech niedrig ein, um den

Schnee bei geringer Wurfweite auszuwerfen; stellen Sie das Ablenkblech

höher ein, um den Schnee weiter auszuwerfen.

• SB270, SB300, SB927, SB1130: Drücken Sie den Fernbedienung-

shebel für das Ablenkblech (K) nach unten und nach vorne, um das

Ablenkblech zu senken und die Auswurfweite zu verringern. Ziehen Sie

den Hebel an, um das Ablenkblech anzuheben und die Auswurfweite

zu erhöhen. Stellen Sie sicher, dass der Hebel zurückschnellt und in

der gewünschten Position einrastet.

• SB240, SB524: Um die Position des Auswurfrinnen-Ablenkblechs

manuell einzustellen, lösen Sie die Schraube, stellen Sie das Ablen-

kblech beliebig ein, und ziehen Sie die Schraube wieder fest an.

SB270, SB300, SB927, SB1130:

SB240, SB524:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG PSB300 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG PSB300 Manual

Product: