Manual AEG PS 305 DG (page 4 of 111) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463172

Zoom out

Zoom in

1/111

6 7

Do not use cracked or distorted saw blades.

Before using the tool please read the instructions. If

possible have the tool demonstrated.

The dust produced when using this tool may be harmful

to health. Use a dust absorption system and wear a

suitable dust protection mask. Remove deposited dust

thoroughly, e.g. with a vacuum cleaner.

Stock having a round or irregular cross section (such as

rewood) must not be cut, as it can not be securely held

during cutting. When sawing thin stock layed on edge, a

suitable auxilary fence must be used for rm support.

SPECIFIED CONDITIONS OF USE

The mitre saw can be used for sawing solid wood,

bonded wood, glued veneer, materials similar to wood,

and plastics.

Do not use this product in any other way as stated for

normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this

product is in conformity with the following standards or

standardized documents. EN 61029, EN 55014-1, EN

55014-2, EN 61000-3-2, EN 61000-3-3 in accordance

with the regulations 98/37/EC, 2004/108/EC

Rainer Kumpf

Manager Product Development

Winnenden, 2008-08-26

MAINS CONNECTION

Connect only to single-phase a.c. current and only to

the system voltage indicated on the rating plate. It is

also possible to connect to sockets without an earthing

contact as the design conforms to safety class II.

MAINTENANCE

The ventilation slots of the machine must be kept clear

at all times.

Use only AEG accessories and AEG spare parts.

Should components need to be replaced which have not

been described, please contact one of our AEG service

agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

printed on the label and order the drawing at your local

service agents or directly at: AEG Electric Tools,

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

SYMBOLS

Please read the instructions carefully

before starting the machine.

Always disconnect the plug from the

socket before carrying out any work on

the machine.

Wear ear protectors!

Always wear goggles when using the

machine.

Always keep hands away from the path

of the saw blade.

Never expose tool to rain.

Danger

Do not dispose of electric tools together

with household waste material! In

observance of European Directive

2002/96/EC on waste electrical and

electronic equipment and its

implementation in accordance with

national law, electric tools that have

reached the end of their life must be

collected separately and returned to an

environmentally compatible recycling

facility.

ENGLISH

TECHNICAL DATA

Rated input .......................................................................

Amps ................................................................................

No-load speed ..................................................................

Saw blade dia. x hole dia..................................................

Saw blade thickness .........................................................

Cutting width

horizontal / vertical

90° 90° .............................................................

45° 90° .............................................................

90° 45° ......................................................

45° 45° ......................................................

Max. height at 90° / 90° ....................................................

Max. height at 45° / 90° ....................................................

Weight ..............................................................................

Typical weighted acceleration in the hand-arm area ........

Typical A-weighted sound levels:

Sound pressure level (K = 3 dB(A)) ...............................

Sound power level (K = 3 dB(A)) ...................................

Measured values determined according to EN 61 029

WARNING! Read all safety warnings and all

instructions, including those given in the

accompanying brochure. Failure to follow the

warnings and instructions may result in electric shock,

re and/or serious injury.

Save all warnings and instructions for future

reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause

hearing loss.

Appliances used at many different locations including

open air must be connected via a current surge

preventing switch.

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes

and apron.

Always disconnect the plug from the socket before

carrying out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the

machine. Always lead the cable away behind you.

Sawdust and splinters must not be removed while the

machine is running.

Never reach into the danger area of the plane when it is

running.

Before use check machine, cable, and plug for any

damages or material fatigue. Repairs should only be

carried out by authorised Service Agents.

Always use the protective shields on the machine.

Do not clamp the protective swing guard.

Do not use saw blades which are damaged or deformed

Replace the table insert when worn

Do not use saw blades not corresponding to the key

data given in these instructions for use.

The protective cover should only open when the

machine is lowered to the workpiece.

Do not use saw blades made of high-speed steel.

Any faults with the machine, including any related to the

safeguard or the saw blades, must be reported to the

persons in charge of safety as soon as the faults are

discovered.

It is necessary to select a saw blade which is suitable

for the material being cut.

Never use the mitre saw to cut materials other than

those specied in the instruction manual.

The handle lock must always be engaged when

transporting the mitre saw.

Only use the saw with guards in good working order and

properly maintained, and in position.

Keep the oor area free of loose material e.g. chips and

cut-offs.

Only use saw blades which have been properly

sharpened. It is essential to adhere to the maximum

speed specied on the saw blade.

Do not use any anges other than those supplied or

indicated in the instruction manual to secure the saw

blade.

Refrain from removing any cut-offs or other parts of the

workpiece from the cutting area whilst the machine is

running and the saw head is not in the rest position.

Ensure that the machine is always stable and secure

(e.g. xed to a bench)

Long workpieces must be adequately supported.

ENGLISH

220-240 V 110 V

.....................1800 W ......................1800 W

...........................8 A ........................15,5 A

.....................4400

min

-1

................... 4000

min

-1

...............305 x 30 mm .............. 305 x 30 mm

........................2,4 mm .......................2,4 mm

.............. 111 / 342 mm ..............111 / 342 mm

.............. 111 / 241 mm ..............111 / 241 mm

................63 / 241 mm ...............63 / 241 mm

................41 / 241 mm ...............41 / 241 mm

................63 / 241 mm ...............63 / 241 mm

................41 / 241 mm ...............41 / 241 mm

................166 / 53 mm ...............166 / 53 mm

................166 / 10 mm ...............166 / 10 mm

.........................31 kg .......................... 31 kg

.......................... 4 m/s

........................ 4 m/s

.........................95 dB (A) ................... 95 dB (A)

.......................108 dB (A) ................. 108 dB (A)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG PS 305 DG in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG PS 305 DG Manual

Product: