473798
34
Zoom out
Zoom in
Previous page
1/132
Next page
Protect PV.500 Operating Instructions
30 of 70 80000031354 BAL
5.1.8 Sequence Control Parameters
Switch-on conditions: Underfrequency, overfrequency,
undervoltage, overvoltage:
The equipment will only switch from the "Waiting for feed
conditions" status to the "Operation" status if the feed conditions
are met. These conditions include the mains voltage and the mains
frequency. These values must be within certain limits described by
the switch-on conditions.
Voltage limit value for night detection,
delay time for night detection:
If the DC voltage falls below the voltage limit value for longer than
the delay time, the unit switches to the "Night" status.
Voltage limit value for day detection,
delay time for day detection:
If the DC voltage rises above the voltage limit value for longer than
the delay time, the equipment switches to the "Waiting for feed
conditions" status.
Inverter stack switch-on time:
The time for which the inverter stack is switched on during a start-
up attempt
Permissible voltage dip after switching on the stack:
Prior to the start-up attempt, a limit value is calculated from the
present DC voltage and the permissible voltage dip.
If the start-up attempt causes the DC voltage to fall below this
calculated limit value, this start-up attempt will fail.
Delay until the next start-up attempt following failure on
account of excess voltage dip:
After the failure of a start-up attempt, this delay must elapse before
the next start-up attempt is made.
Power limit value for shutdown,
delay time for shutdown:
If the power fed into the mains remains below the limit value for
longer than the delay time, the unit switches to the "Waiting"
status.
Standard delay for a renewed start-up attempt following
shutdown,
offset delay added to the standard delay after shutdown,
maximum number of times the offset delay can be added to
the standard delay:
Variable delay in the "Waiting" status Æ Chapter 5.1.4.
Minimum DC voltage,
fill factor (PV system parameter):
If the DC voltage rises above a value resulting from the minimum
DC voltage divided by the fill factor, a start-up attempt is made.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Protect PV 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Protect PV 500 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Protect PV 500

AEG Protect PV 500 User Manual - German - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info