473797
12
Zoom out
Zoom in
Previous page
1/51
Next page
Protect PV.250 Operating Instructions
Page 12 of 51 80000027023 BAL, en
Possible change of status:
Once the delay has elapsed, the unit switches to the "Waiting for
feed conditions" status.
If a deactivating or self-acknowledging fault is triggered, the unit
switches to the "Fault" status.
The status can be switched from "Operation" to "OFF" using the
"Off" control command.
4.1.5 The "Fault" Status
If a deactivating or self-acknowledging fault is triggered (see Chap-
ter 5), the unit switches to the "Fault" status.
The monitoring systems are activated.
In this status, no power is fed into the mains.
Possible change of status:
If a self-acknowledging fault has been triggered and this fault does
indeed acknowledge itself, the unit switches to the "Waiting for
feed conditions" status.
If a deactivating fault has been triggered, the "Acknowledge fault"
control command can be used to switch the unit back to the "Wait-
ing" status".
The status can be switched from "Fault" to "OFF" using the "Off"
control command. In the "OFF" status, the unit is always free of
faults.
4.1.6 The "Night" Status
If the DC voltage falls below a certain value for a certain time, the
Protect PV.250 switches to the "Night" status.
The monitoring systems are activated.
In this status, no power is fed into the mains.
Possible change of status:
If, the following morning, the DC voltage rises above a certain
value for a certain time, the unit switches to the "Waiting for feed
conditions" status.
If a deactivating or self-acknowledging fault is triggered, the unit
switches to the "Fault" status.
The status can be switched from "Operation" to "OFF" using the
"Off" control command.
4.1.7 Sequence Control During the Course of the Day
Early morning:
The Protect PV.250 is in the "Night" status. The sun's rays in-
crease the DC voltage generated by the PV cells. If this voltage
stays above a certain value for a certain time, the unit switches to
the "Waiting for feed conditions" status.
The DC voltage continues to be monitored in this status. In order
for a start-up attempt to be made, it must remain above a certain
value for a certain time. The mains voltage and mains frequency
are also checked. These values must be within certain limits.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Protect PV 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Protect PV 250 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Protect PV 250

AEG Protect PV 250 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info