473801
11
Zoom out
Zoom in
Previous page
1/24
Next page
2.1.5. Setup
Menu Structure - Setup
Display Functions Description
[-] External Alarm Only applicable if external alarm is connected
Stop Alarm Stop alarm
Test Alarm Includes testing red LED on front
Alarm time-out: 009 s
Amount of time the alarm is active in seconds. If value is set to 0,
alarm time-out is disabled and the alarm will be active until the fail-
ure that has triggered the alarm is corrected or the alarm has been
stopped. See above.
Alarm state: Disabled
[-] Setup details
Language: English
The language in the display; changing the display language does
not affect country setting
[-] Inverter details
Inverter name:
AEG PS The inverter's name. Max. 15 characters and not only numbers.
Group name:
*
The name of the group the inverter is part of
Group name Max. 15 characters
[-] Master mode
*
Master mode: Enabled
*
[-] Network
*
Only visible if Master mode is enabled.
[-] Initiate network scan
[-] Scan progress: 0%
[-] Inverters found: 0
Plant name:
*
The name of the plant.
Plant name
*
Max. 15 characters
[-] Set date and time
Date: dd.mm.yyyy (30.12.2002) Set the current date
Time: hh.mm.ss (13.45.27) Set the current time
[-] Calibration Only applicable if sensors are connected
[-] PV array
PV input 1: 6000 W
PV 1 area: 123 m
2
PV input 2: 6000 W
PV 2 area: 123 m
2
PV input 3: 6000 W Not visible if inverter only has 2 PV inputs
PV 3 area: 123 m
2
Not visible if inverter only has 2 PV inputs
[-] Irradiation sensor
Scale (mV/1000 W/m
2
): 75
Sensor calibration
Temp. coeff: 0.06 %/
o
C
Sensor calibration
[-] Temp. sensor offset
PV module temp: 2
o
C
Sensor calibration (offset)
Ambient Temp: 2
o
C
Sensor calibration (offset)
[-] S0 sensor input
Scale (pulses/kWh): 1000 Sensor calibration. See note
[-] Environment
CO
2
emission factor:
*
Value to be used for total CO
2
saved calculation
0.5 kg/kWh
*
Remuneration per kWh:
*
Value to be used for total revenue calculation
44.42 ct/kWh
Yield start count: 1000 kWh
*
A value used as an offset from the current production value when
calculating the yield.
[-] Communication setup Only applicable if communication accessories are connected
[-] RS485 setup
Network: 15
Subnet:15
Address: 255
[-] IP Setup
IP config: Automatic
IP address:
192.168.1.191
Subnet mask:
255.255.255.0
Default gateway:
192.168.1.1
DNS server:
123.123.123.123
Table 2.7: Setup
*) Not available.
2. Display
10 8000038784_00_BAL_en / L00410565-01_02
2
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG PROTECT PV 12.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG PROTECT PV 12.5 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG PROTECT PV 12.5

AEG PROTECT PV 12.5 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info