473796
30
Zoom out
Zoom in
Previous page
1/33
Next page
5.1.3. Auxiliary Interface Specifications
Parameter Parameter details Specification
Serial Communication RS485
Common cable specification
Cable jacket diameter ()
2 x 5-7 mm
Cable type
Shielded Twisted Pair (STP) (Cat 5e)
2)
Cable Characteristic Impedance 100 Ω – 120 Ω
Max. cable length 1000 m
RJ45 (2 pcs.) connectors Wire gauge 24-26 AWG (depending on mating
metallic RJ45 plug)
Cable shield termination Via metallic RJ45 plug
Terminal block Maximum wire gauge
2.5 mm
2
Cable shield termination Via EMC cable clamp
Max. number of inverter nodes
63
4)
Galvanic interface insulation Yes, 500 Vrms
Direct contact protection Double/Reinforced insulation Yes
Short circuit protection Yes
Communication Star and daisy chain Ethernet
Common cable Max. cable length between inver-
ters
100 m (total network length: unlimi-
ted)
Specification Max. number of inverters
100
1)
Cable type
Shielded Twisted Pair (STP) (Cat 5e)
2)
Temperature sensor input
3 x PT1000
3)
Cable specification
Cable jacket diameter ()
4-8 mm
Cable type Shielded Single Pair - 2-wire
Cable shield termination Via EMC cable clamp
Maximum wire gauge
2.5 mm
2
Maximum resistance per wire
10
Maximum cable length 30 m
Sensor specification Nominal resistance/temperature
coefficient
3.85 /
o
C
Measurement range
-20
o
C - +100
o
C
Measurement accuracy ±3%
Direct contact protection Double/Reinforced insulation Yes
Short circuit protection Yes
Irradiation sensor input x 1
Cable specification
Cable jacket diameter ()
4-8 mm
Cable type Shielded Single Pair - Number of wires
depend on the sensor type used
Cable shield termination Via EMC cable clamp
Maximum wire gauge
2.5 mm
2
Maximum resistance per wire
10
Maximum cable length 30 m
Sensor Specification Sensor type Passive
Measurement accuracy ±5% (150 mV sensor output voltage)
Output voltage of sensor 0-150 mV
Max. output impedance (sensor)
500
Input impedance (electronics)
22 k
Direct contact protection Double/Reinforced insulation Yes
Short circuit protection Yes
Energy meter input S0 input x 1
Cable specification
Cable jacket diameter ()
4-8 mm
Cable type Shielded Single Pair - 2-wire
Cable shield termination Via EMC cable clamp
Maximum wire gauge
2.5 mm
2
Maximum cable length 30 m
Sensor Input Specification Sensor input class Class A
Nominal output current
12 mA for an 800 load
Maximum short circuit output cur-
rent
24.5 mA
Open circuit output voltage +12 VDC
Maximum pulse frequency 16.7 Hz
Direct contact protection Double/Reinforced insulation Yes
Short circuit protection Yes
Table 5.8: Auxiliary Interface Specifications
5. Technical Data
8000038781_00_BAL_en / L00410564-01_02 29
5
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Protect PV - Solar Inverters at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Protect PV - Solar Inverters in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Protect PV - Solar Inverters

AEG Protect PV - Solar Inverters User Manual - German - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info