Manual AEG Protect PV - Solar Inverters (page 18 of 33) (English)

473796

Zoom out

Zoom in

1/33

When unmated the MC4 connectors are not IP54. The intrusion of moisture may

occur in the following situations:

1. The inverter runs in Master/Slave operation and only one or two PV in-

puts are in use. In this case, the other inputs are not connected to PV

and they are therefore open to intrusion.

2. Not all PV inputs are connected.

3. PV connectors are not fitted; for example in case of disconnection of

parts of a PV plant over a longer period of time.

In situations where the PV connectors are not fitted, a seal cap must be mounted

(included in the scope of the delivery). All inverters with MC4 connections are de-

livered with seal caps on inputs 2 and 3. During installation, the seal caps of those

inputs that are to be used are discarded.

Note:

The inverter is protected against reversed polarity but it will not generate power until the po-

larity is corrected. To achieve optimum production, the open circuit voltage (STC) of the PV

modules must be lower than the max. input voltage of the inverter (see the specifications),

multiplied with a factor of 1.13. U

, STC x 1.13 ≤ U

MAX

, inv

3.7.

Auxiliary Input/Output

Note:

When choosing the installation place, ensure that all labels are visible at all times.

For details refer to the section

Specifications

The inverter has the following auxiliary input/output:

• 2 x RJ45 for RS485

• 2 x RJ45 for Ethernet

• 1 x 8 pole terminal block for RS485

• 1 x 10 pole terminal block for

- PT1000 temperature sensor input x 3

- Irradiation sensor input

- Energy meter (S0) input

• 1 x 2 pole terminal block for relay outputs

Refer to the specifications for an overview of the communication board and to the inverter user

manual for details regarding auxiliary input configuration via the display.

3.8.

Autotest Procedure - Italy Only

An automatic test of the inverter can be initialised by activating the Inverter Autotest Software

in the display. On the display find [Setup → Setup details → Autotest] and press OK. The autot-

est of the inverter will now start.

The inverter autotest manual can be obtained from the inverter manufacturer.

3. Installation

8000038781_00_BAL_en / L00410564-01_02 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG Protect PV - Solar Inverters in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Protect PV - Solar Inverters

AEG Protect PV - Solar Inverters User Manual - German - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG Protect PV - Solar Inverters Manual

Product: